Hello everyone,
I setup the Live stream app and it was working fine but since last two days I am facing this problem with the my live stream,
it runs fine but it stops and resumes every 10 seconds.
Total connected users were 37-40.
Ram and CPU status are fine.
I have restarted the wowza media server service and even restarted the encoder.
I have checked logs but I don’t see any errors except Missing function: stop/start Transmit.
I need to resolve this issue as soon as possible.
Thanks
You are actually showing Output Size not Bit Rate. What is the Bit Rate setting? Try making is significantly (try half) lower. See if that helps. Your description sounds like the bitrate is a little higher than the client bandwidth.
Richard
Have you followed the steps in the Performance Tuning Guide? This very important step will configure Wowza to take advantage of all the available resources on the host server.
-Tim
If you have the option to use AAC audio in FMLE you should use it, otherwise for mp3 audio change “mono” to “stereo”.
Also what is your GOP(Group of Pictures/key frame interval)? it should be 1 or 2 seconds or every 15 to 30 frames.
What size is your network interface controller(NIC) on the server?
Salvadore
I am running Wowza Version 3.5 in virtual private server of 4GB RAM.
The problem is it pauses for just about a or two seconds and then resumes.
The TV viewers are our audience.
My AFMLE encoder settings are :
Video settings:
Card type: blackmagic.
Format: H.264
Frame Rate: 15
Input size: 720*576
Bit Rate: 350 Kbps
Output Size: 320*256
Audio Settings:
Format: mp3
Channels: mono:
Sample Rate : 44100 Hz
Bit Rate: 128 Kbps
Total Bandwith required = 478 Kbps
Locally it has no issue.
I have corrected the Bitrate and added the output size
Bit Rate = 350Kbps
Output Size =320*240