SLStreamer PRO transcoder/encoder

Wowza Streaming Engine
2
  1. RTSP:

Follow these instructions:

http://community.wowza.com/t/-/53

  1. From the description this sounds more like an MPEG-TS stream over RTP. In this case you do not need an SDP file. The instructions are here:

http://community.wowza.com/t/-/49

  1. I believe this is another MPEG-TS stream where the above instructions apply.

Just carefully follow the instructions in these posts to get it to work. Make sure you don’t miss any steps or make any assumptions. I would try the MPEG-TS case first. Will probably have better luck.

Charlie