Helo,
I am using Flash Media Live Encoder V3.2 to stream video to Wowza, is possible to access those stream over RTSP? is possible how to configure?
Regards
Tazk
Out of the box, an application with the “live” type will give you RTSP. Just point the client to rtsp://server:port/application/stream
-Ian
Jack,
The instructions are here:
https://www.wowza.com/docs/how-to-set-up-live-streaming-using-an-rtmp-based-encoder)
Change /conf/[app-name]/Application.xml /RTP /Authentication /PlayMethod from “digest” to “none”
And use port 1935:
rtsp://[wowza-address]:1935/live/myStream
You can use default rtsp by enabling 554 in /conf/VHost.xml /HostPort /Port “1935” to “1935,554”, then restart Wowza. Then rtsp without port 1935:
rtsp://[wowza-address]/live/myStream
Richard
Which encoder are you using?
Richard
At this point you will have to describe the problem again. What exactly are you doing, trying to do, what is working or not?
Richard
firewall, maybe?
What are you trying to connect with?
Are you showing any connection attempts in the Wowza log?
Do you tested rtsp stream in VLC player ?
BTW : VLC 1.1.5 has problem with RTSP from wowza … use latest version …
Do U tested rtsp://192.168.1.100:1935/live/livestream1 ?
Out of the box, an application with the “live” type will give you RTSP. Just point the client to rtsp://server:port/application/stream
-Ian
i have been try to access over rtsp application, but get error… , any solution?
firewall not enable in my server and client, iam using Mplayer for Windows, do you have recomm rtsp player?,
log file, not appear connect attemp
helo,
my application (rtsp player) success connect to wowza, but can’t display image, below logs:
Switching State From NONE to INIT
Initializing (192.168.1.101:0) and rtsp://192.168.1.100/live/livestream1
Initialization successful.
Switching State From INIT to DESCRIBE
Switching State From DESCRIBE to WAIT_DESCRIBE_REPLY
Sending:
DESCRIBE rtsp://192.168.1.100:554/live/livestream1 RTSP/1.0
CSeq: 0
User-Agent: StreamCoders RTSP 1.0
Accept: application/sdp
Response received:
RTSP/1.0 200 OK
Content-Base: rtsp://192.168.1.100:554/live/livestream1/
Content-Length: 135
Session: 37642800;timeout=60
CSeq: 0
Content-Type: application/sdp
Server: Wowza Media Server 2.2.2 build26399
v=0
o=- 37642800 37642800 IN IP4 127.0.0.1
s=WowzaMediaServer
c=IN IP4 0.0.0.0
t=0 0
a=sdplang:en
a=range:npt=now-
a=control:*
Switching State From WAIT_DESCRIBE_REPLY to SETUP
No Tracks Available.
Switching State From SETUP to PLAY
Switching State From PLAY to WAIT_PLAY_REPLY
Sending:
PLAY rtsp://192.168.1.100:554/live/livestream1/ RTSP/1.0
CSeq: 1
User-Agent: StreamCoders RTSP 1.0
Range: npt=0-
Response received:
RTSP/1.0 200 OK
Range: npt=now-
Session: 37642800;timeout=60
CSeq: 1
Server: Wowza Media Server 2.2.2 build26399
Switching State From WAIT_PLAY_REPLY to WAIT_TERMINATION
is any setting untouch?
Regards
yes, vlc player too… but i get this error Log:
Connection failed:
VLC could not connect to “192.168.1.100:554”.
Your input can’t be opened:
VLC is unable to open the MRL ‘rtsp://192.168.1.100/live/livestream1’. Check the log for details.
we use latest version, and port 1935 tested but still get problem
Which encoder are you using?
Richard
iam using Flash Media Live Encoder 3.2, is this have problem?
Hello
perfectly, now i can access streaming over rtsp application like vlc, the problem just about my PC,
Regards