Access internal streams from public Ip

Wowza Streaming Engine
1

I’m testing wowza and actually streaming something from it, It worked perfectly on my local netword , but when I try to access it from outside using my public ip it wont :

Example:

Here is the local stream address:

http://192.168.1.12:1935/TEST/mystream/playlist.m3u8 -> Works fine of course in local network

http://90.20.21.5:1935/TEST/mystream/playlist.m3u8 -> Does not work !!

Knowing that I did so on my gateway NAT:

application: HTTP

internal port: 1935

external port: 1935

protocol: TCP

device: 192.168.1.12

am I doing something wrong ?

Thanks,

2

Hello,

This scenario should work with a Static NAT translation or Port Forwarding. If you have an Overload NAT or Dynamic NAT setup, this could be causing the problem.

You may also need to setup rules or policy settings if your router is performing deep packet inspection.

Could you further describe the type of router and NAT configuration?

Best regards,

Andrew