# youtube dash stream target

**URL:** <https://community.wowza.com/t/youtube-dash-stream-target/33862>\
**Category:** Wowza Streaming Engine\
**Created:** [September 13, 2016, 10:05pm UTC](https://community.wowza.com/t/youtube-dash-stream-target/33862 "2016-09-13T22:05:44Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![kv\_pham](https://avatars.discourse-cdn.com/v4/letter/k/7bcc69/32.png) [@kv\_pham](https://community.wowza.com/u/kv_pham)\
**Post date:** [September 13, 2016, 10:05pm UTC](https://community.wowza.com/t/youtube-dash-stream-target/33862/1 "2016-09-13T22:05:44Z")

</div>

hello

via YT API it’s possible to ingest dash. It would be great to enable dash push publish.

Second suggestion:

enable both iso bmff (h264 aac) and webm (vp9 vp8 opus)

thanks

---

<div class="post-metadata">

**Author:** ![Andrew\_Ramberg](https://avatars.discourse-cdn.com/v4/letter/a/7c8e57/32.png) [@Andrew\_Ramberg](https://community.wowza.com/u/Andrew_Ramberg)\
**Post date:** [October 13, 2016, 1:02pm UTC](https://community.wowza.com/t/youtube-dash-stream-target/33862/2 "2016-10-13T13:02:14Z")

</div>

Hello,

Currently DASH push publishing not supported by Wowza Streaming Engine.

Webm is currently available with transcoding as shown in the following article:

[How to transcode live streams to WebM for MPEG-DASH playback](https://www.wowza.com/docs/how-to-transcode-live-streams-to-webm-for-mpeg-dash-playback)

I will add your comments about DASH Stream Targets and iso bmff to our Feature Request Backlog for consideration.

Best regards,

Andrew

---

<div class="post-metadata">

**Author:** ![kv\_pham](https://avatars.discourse-cdn.com/v4/letter/k/7bcc69/32.png) [@kv\_pham](https://community.wowza.com/u/kv_pham)\
**Post date:** [May 26, 2017, 5:55pm UTC](https://community.wowza.com/t/youtube-dash-stream-target/33862/3 "2017-05-26T17:55:30Z")

</div>

Is mpeg-dash stream target now implemented ?

The release notes for 4.7.0.01 update state that:

- Fixed HTTP stream target profiles (for HLS, HDS, and MPEG-DASH) so that they do not show adaptive (ABR) groups as being “ready” until they have a populated chunklist, avoiding the “Failed to create group playlist for group…” log that would appear at the beginning of the ABR push session(s)

But nothing appears on the dashboard