# Wowza Consultant needed

**URL:** <https://community.wowza.com/t/wowza-consultant-needed/43004>\
**Category:** Hire a Consultant\
**Created:** [May 11, 2014, 7:17am UTC](https://community.wowza.com/t/wowza-consultant-needed/43004 "2014-05-11T07:17:27Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mark\_News](https://avatars.discourse-cdn.com/v4/letter/m/ce73a5/32.png) [@Mark\_News](https://community.wowza.com/u/Mark_News)\
**Post date:** [May 11, 2014, 7:17am UTC](https://community.wowza.com/t/wowza-consultant-needed/43004/1 "2014-05-11T07:17:27Z")

</div>

I have an headend IPTV gateway, which provides 100 channels MPEG 2 TS. I want to transcode the channels and re-issue the stream back to my gateway for broadcast to my STB. Can anyone help with wowza configuration, as i want to use it for trancoding.

---

<div class="post-metadata">

**Author:** ![Gustavo\_Villegas](https://avatars.discourse-cdn.com/v4/letter/g/57b2e6/32.png) [@Gustavo\_Villegas](https://community.wowza.com/u/Gustavo_Villegas)\
**Post date:** [May 11, 2014, 5:47pm UTC](https://community.wowza.com/t/wowza-consultant-needed/43004/2 "2014-05-11T17:47:39Z")

</div>

Hello there … contact me at Gustavo@glidertek.com so we can discuss in detail your needs.

Best Regards

---

<div class="post-metadata">

**Author:** ![Roman\_Shmelev](https://avatars.discourse-cdn.com/v4/letter/r/e5b9ba/32.png) [@Roman\_Shmelev](https://community.wowza.com/u/Roman_Shmelev)\
**Post date:** [May 12, 2014, 8:03am UTC](https://community.wowza.com/t/wowza-consultant-needed/43004/3 "2014-05-12T08:03:32Z")

</div>

you’ll need something like a small transcoding cluster… i can probably help with that.

contact me here: rshmelev [at] gmail {dot} com

---

<div class="post-metadata">

**Author:** ![Karel\_Boek](https://sea2.discourse-cdn.com/flex002/user_avatar/community.wowza.com/karel_boek/32/454_2.png) [@Karel\_Boek](https://community.wowza.com/u/Karel_Boek)\
**Post date:** [May 16, 2014, 6:50am UTC](https://community.wowza.com/t/wowza-consultant-needed/43004/4 "2014-05-16T06:50:41Z")

</div>

Hi,

Although I’m not from Australia, I’m confident that I can help you in this matter. You wouldn’t be my first customer from down-under, but more importantly, I’ve got other active projects with similar configurations. I’m familiar with handling the amount of channels, as well as setting up a transcoder workflow. I’ll happily advise you, and help you with the setup and configuration of a suitable solution. For 100+ channels, there may be other interesting transcoders than Wowza.

Don’t hesitate to contact me on Skype (karelboek) or by email.

Kind Regards,

Karel Boek

karel.boek@raskenlund.com

![](https://raskenlund.com/templates/themza_j15_35/images/logo1.gif)

Raskenlund

www.raskenlund.com

---

<div class="post-metadata">

**Author:** ![Mark\_News](https://avatars.discourse-cdn.com/v4/letter/m/ce73a5/32.png) [@Mark\_News](https://community.wowza.com/u/Mark_News)\
**Post date:** [May 15, 2014, 9:30pm UTC](https://community.wowza.com/t/wowza-consultant-needed/43004/5 "2014-05-15T21:30:42Z")

</div>

Just to clarify; my system only accepts TS over http or HLS. Source is MPEG2 TS http stream at a 3.5 - 4.5Mbps bitrate and would need it to be transcoded to approx 1Mbps as HLS http stream. I have 100 streams that need to be transcoded. Need help with the setup and the configuration. Any consultants here from Australia?

---

<div class="post-metadata">

**Author:** ![Mark\_News](https://avatars.discourse-cdn.com/v4/letter/m/ce73a5/32.png) [@Mark\_News](https://community.wowza.com/u/Mark_News)\
**Post date:** [May 16, 2014, 1:57am UTC](https://community.wowza.com/t/wowza-consultant-needed/43004/6 "2014-05-16T01:57:36Z")

</div>

Most of the consultants that responded could not start work immediately. Is there anyone that can start work immediately?