# Wirecast poor quality and good quality live flash

**URL:** <https://community.wowza.com/t/wirecast-poor-quality-and-good-quality-live-flash/38496>\
**Category:** Wowza Streaming Engine\
**Created:** [April 16, 2012, 9:25pm UTC](https://community.wowza.com/t/wirecast-poor-quality-and-good-quality-live-flash/38496 "2012-04-16T21:25:54Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![luis\_carpio](https://avatars.discourse-cdn.com/v4/letter/l/ecb155/32.png) [@luis\_carpio](https://community.wowza.com/u/luis_carpio)\
**Post date:** [April 16, 2012, 9:25pm UTC](https://community.wowza.com/t/wirecast-poor-quality-and-good-quality-live-flash/38496/1 "2012-04-16T21:25:54Z")

</div>

Good day I write from mexico … I’m new here …

I want to ask your help and recommendations …

I have Wowza and Control Cast (updated)

I want to convey with Wirecast.Pro.v4.1.3

Everything works fine … the problem is that I notice that there are more quality Flash Media Live Encoder, just put all the preferences

Output Format: Flash

format: H.264

Width: 640

Height: 480

FPS: 25

Avg bitrate: 500

Baseline

Key frame every 240 frames

44,100 KBps Audio Stereo 96 kHz

And printed the screen and I see more quality Flash Media Live Encoder … to be?

I hope and I can help …

Here is the link of my channel

[http://villahidalgoysugente.com/ver-en-vivo/2012/ENVIVO.htm](http://villahidalgoysugente.com/ver-en-vivo/2012/ENVIVO.htm)

regards

---

<div class="post-metadata">

**Author:** ![Richard\_Lanham](https://avatars.discourse-cdn.com/v4/letter/r/c68b51/32.png) [@Richard\_Lanham](https://community.wowza.com/u/Richard_Lanham)\
**Post date:** [April 17, 2012, 1:36pm UTC](https://community.wowza.com/t/wirecast-poor-quality-and-good-quality-live-flash/38496/2 "2012-04-17T13:36:55Z")

</div>

Welcome to Wowza forum. I’m not sure what to suggest. There are many settings and options in Wirecast, keep trying them. It is often a balance between quality (higher bitrate) and smooth delivery over the internet (low bitrate). Smooth delivery is preferred over higher quality image in most cases

Richard

---

<div class="post-metadata">

**Author:** ![Randall\_Auriemma](https://avatars.discourse-cdn.com/v4/letter/r/85e7bf/32.png) [@Randall\_Auriemma](https://community.wowza.com/u/Randall_Auriemma)\
**Post date:** [April 17, 2012, 2:36pm UTC](https://community.wowza.com/t/wirecast-poor-quality-and-good-quality-live-flash/38496/3 "2012-04-17T14:36:31Z")

</div>

Hi dj\_carpio,

If you can duplicate the FMLE settings in Wirecast, the stream should look the same, right? Is this not happening? As far as a recommendation, many people are using Wirecast with Wowza successfully.

---

<div class="post-metadata">

**Author:** ![luis\_carpio](https://avatars.discourse-cdn.com/v4/letter/l/ecb155/32.png) [@luis\_carpio](https://community.wowza.com/u/luis_carpio)\
**Post date:** [April 17, 2012, 4:44pm UTC](https://community.wowza.com/t/wirecast-poor-quality-and-good-quality-live-flash/38496/4 "2012-04-17T16:44:06Z")

</div>

if then your 100% recommend Wirecast?? Wirecast is better than another?

thank you very much for answering … regards