# webcamrecording security

**URL:** <https://community.wowza.com/t/webcamrecording-security/44209>\
**Category:** Wowza Streaming Engine\
**Created:** [November 2, 2014, 11:27pm UTC](https://community.wowza.com/t/webcamrecording-security/44209 "2014-11-02T23:27:06Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![S\_Murray](https://avatars.discourse-cdn.com/v4/letter/s/db5fbb/32.png) [@S\_Murray](https://community.wowza.com/u/S_Murray)\
**Post date:** [November 2, 2014, 11:27pm UTC](https://community.wowza.com/t/webcamrecording-security/44209/1 "2014-11-02T23:27:06Z")

</div>

What is the best way to add security to the webcamrecording example on streaming engine? I tried the secureToken route (which I think worked on older server versions), but no luck now?

Any suggestions?

Thanks,

J

---

<div class="post-metadata">

**Author:** ![sal\_jefferson](https://avatars.discourse-cdn.com/v4/letter/s/6de8d8/32.png) [@sal\_jefferson](https://community.wowza.com/u/sal_jefferson)\
**Post date:** [November 3, 2014, 3:09pm UTC](https://community.wowza.com/t/webcamrecording-security/44209/2 "2014-11-03T15:09:03Z")

</div>

Hello there and welcome tot he Wowza support forum.

For securing a Flash application that publishes you have two options. [ModuleOnConnectAuthenticate](https://www.wowza.com/docs/how-to-do-file-based-rtmp-authentication-with-netconnection-connect-onconnectauthenticate) is one. Or you can use [ModuleSecureURLParams](https://www.wowza.com/docs/how-to-secure-publishing-from-an-rtmp-encoder-that-does-not-support-authentication-modulesecureurlparams%28ModuleSecureURLParams%29), which is also part of the MediaSecurity Addon package.

Kind regards,

Salvadore