# UDP Tramision Sony Ipela SNC-EB630

**URL:** <https://community.wowza.com/t/udp-tramision-sony-ipela-snc-eb630/47155>\
**Category:** Wowza Streaming Engine\
**Tags:** media-players-and-devices\
**Created:** [June 14, 2016, 5:05pm UTC](https://community.wowza.com/t/udp-tramision-sony-ipela-snc-eb630/47155 "2016-06-14T17:05:09Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jose\_Siu](https://avatars.discourse-cdn.com/v4/letter/j/ecd19e/32.png) [@Jose\_Siu](https://community.wowza.com/u/Jose_Siu)\
**Post date:** [June 14, 2016, 5:05pm UTC](https://community.wowza.com/t/udp-tramision-sony-ipela-snc-eb630/47155/1 "2016-06-14T17:05:09Z")

</div>

Hi,

I wonder if anyone can guide on how to setup correctly UDP transmission on Sony Ipela SNC-EB630 IP Camera

http:///command/inquiry.cgi?inq=system

CGIVersion=6.0.2.6.0

On most of the manual found online they talk about switch mode.

I tried contacting Sony support and answer the following:

“This information is provided as a whitepaper the information is provided “AS IS”. No product support is available”

Checking a guide found this

http://\<camera\_address\>/image1?UdpMode=unicast&UdpPort=

But is not working

If i use this

http://\<camera\_address\>/image1?UdpMode

Only display a black screen but display the correct information of media (Resolution / FPS, etc)

Currently i am using, and works fine over TCP.

http://\<camera\_address\>/image1

But i have been advised to use UDP better for live streaming video, with no luck.

Thanks in advance for your help.

---

<div class="post-metadata">

**Author:** ![Paul\_Shields](https://sea2.discourse-cdn.com/flex002/user_avatar/community.wowza.com/paul_shields/32/390_2.png) [@Paul\_Shields](https://community.wowza.com/u/Paul_Shields)\
**Post date:** [June 24, 2016, 3:09pm UTC](https://community.wowza.com/t/udp-tramision-sony-ipela-snc-eb630/47155/2 "2016-06-24T15:09:37Z")

</div>

Hi,

It may be that you need to adjust your ingest settings in Wowza for your UDP stream. There are some RTSP settings that can help with problematic sources, [as explained here](https://www.wowza.com/docs/how-to-re-stream-video-from-an-ip-camera-rtsp-rtp-re-streaming%28RTSP-RTP-re-streaming%29#extraLog).

If that doesn’t help then zip up your /conf and /logs and [open a support ticket](https://www.wowza.com/support/open-ticket).

Paul