# Two udp source support ?

**URL:** <https://community.wowza.com/t/two-udp-source-support/42817>\
**Category:** Wowza Streaming Engine\
**Created:** [April 24, 2014, 5:48pm UTC](https://community.wowza.com/t/two-udp-source-support/42817 "2014-04-24T17:48:22Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Ricky\_Tam](https://avatars.discourse-cdn.com/v4/letter/r/db5fbb/32.png) [@Ricky\_Tam](https://community.wowza.com/u/Ricky_Tam)\
**Post date:** [April 24, 2014, 5:48pm UTC](https://community.wowza.com/t/two-udp-source-support/42817/1 "2014-04-24T17:48:22Z")

</div>

My server have 3 NIC, NIC 1 and 2 in for udp stream input (udp stream source is from 2 difference network and IP) and NIC 3 is for stream output, I found Wowza only can have one udp input, I can control the Wowza use NIC 1 or 2 as input with but can’t use both.

Is there any way that the Wowza can use both NIC as udp input ?

RickyTMP

---

<div class="post-metadata">

**Author:** ![sal\_jefferson](https://avatars.discourse-cdn.com/v4/letter/s/6de8d8/32.png) [@sal\_jefferson](https://community.wowza.com/u/sal_jefferson)\
**Post date:** [April 28, 2014, 12:04pm UTC](https://community.wowza.com/t/two-udp-source-support/42817/2 "2014-04-28T12:04:17Z")

</div>

Looking at this article:

How to listen for a multicast stream on a particular network interface

You might be able to skip the VHost.xml setting, and just do the Application.xml setting, then you can have it per application

Salvadore

---

<div class="post-metadata">

**Author:** ![Ricky\_Tam](https://avatars.discourse-cdn.com/v4/letter/r/db5fbb/32.png) [@Ricky\_Tam](https://community.wowza.com/u/Ricky_Tam)\
**Post date:** [April 30, 2014, 3:59pm UTC](https://community.wowza.com/t/two-udp-source-support/42817/3 "2014-04-30T15:59:27Z")

</div>

Thanks Salvadore, I will do some test on what you propose.