# Stream RTP from hardware coder to wowza

**URL:** https://community.wowza.com/t/stream-rtp-from-hardware-coder-to-wowza/37802
**Category:** Wowza Streaming Engine
**Created:** [August 9, 2014, 2:27pm UTC](https://community.wowza.com/t/stream-rtp-from-hardware-coder-to-wowza/37802 "2014-08-09T14:27:34Z")
**Posts on this page:** 4
**Page:** 1

<div class="post-metadata">

### Author: ![Denis\_Iven](https://avatars.discourse-cdn.com/v4/letter/d/c68b51/32.png) [@Denis\_Iven](https://community.wowza.com/u/Denis_Iven)
#### Post date: [August 9, 2014, 2:27pm UTC](https://community.wowza.com/t/stream-rtp-from-hardware-coder-to-wowza/37802/1 "2014-08-09T14:27:34Z")

</div>

Hello!

I have a hardware coder Teleview (COD-2xHDSDI-MP4/2).

It has HD-SDI input and this parameters of output stream:

Video: MPEG4, MPEG-4 Part 10 (AVC),

Profile: Main Profile , High Profile .

Level 1.2-4.2

Audio: MPEG1 Layer 2.

Bitrates up to: 15Mb/ps.

IP output: UDP, RTP, RTP+.

Ethernet: 100 Mbit/s.

This coder can’t push stream to server.

To get stream from coder we need to connect with URL (rtp://ip-address:1234).

Can wowza server take stream with RTP protocol from such hardware coder? Do you have complete decision for RTP streams?

---

<div class="post-metadata">

### Author: ![Matt\_Young](https://sea2.discourse-cdn.com/flex002/user_avatar/community.wowza.com/matt_young/32/389_2.png) [@Matt\_Young](https://community.wowza.com/u/Matt_Young)
#### Post date: [August 11, 2014, 3:22am UTC](https://community.wowza.com/t/stream-rtp-from-hardware-coder-to-wowza/37802/2 "2014-08-11T03:22:29Z")

</div>

You can checkout our guide on connecting to [RTP based encoder](https://www.wowza.com/docs/how-to-set-up-live-streaming-using-a-native-rtp-encoder-with-sdp-file) and start from there.

---

<div class="post-metadata">

### Author: ![Denis\_Iven](https://avatars.discourse-cdn.com/v4/letter/d/c68b51/32.png) [@Denis\_Iven](https://community.wowza.com/u/Denis_Iven)
#### Post date: [September 2, 2014, 11:53pm UTC](https://community.wowza.com/t/stream-rtp-from-hardware-coder-to-wowza/37802/3 "2014-09-02T23:53:31Z")

</div>

thank you

but if encoder can only push native rtp to server, can I setting up wowza for such encoder?

In encoder settings I can only enter IP and port of the server.

Encoder can push UDP stream too.

---

<div class="post-metadata">

### Author: ![sal\_jefferson](https://avatars.discourse-cdn.com/v4/letter/s/6de8d8/32.png) [@sal\_jefferson](https://community.wowza.com/u/sal_jefferson)
#### Post date: [September 3, 2014, 8:47am UTC](https://community.wowza.com/t/stream-rtp-from-hardware-coder-to-wowza/37802/4 "2014-09-03T08:47:36Z")

</div>

Hi there, did you follow the guide Matt linked to?

Are you having an issue getting it working after following the guide?

Thanks.

Salvadore