# SLStreamer PRO transcoder/encoder

**URL:** <https://community.wowza.com/t/slstreamer-pro-transcoder-encoder/359>\
**Category:** Wowza Streaming Engine\
**Created:** [July 7, 2009, 12:23pm UTC](https://community.wowza.com/t/slstreamer-pro-transcoder-encoder/359 "2009-07-07T12:23:38Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Charlie\_Good](https://sea2.discourse-cdn.com/flex002/user_avatar/community.wowza.com/charlie_good/32/383_2.png) [@Charlie\_Good](https://community.wowza.com/u/Charlie_Good)\
**Post date:** [July 7, 2009, 6:51am UTC](https://community.wowza.com/t/slstreamer-pro-transcoder-encoder/359/2 "2009-07-07T06:51:09Z")

</div>

1. RTSP:

Follow these instructions:

[http://community.wowza.com/t/-/53](http://community.wowza.com/t/-/53)

1. From the description this sounds more like an MPEG-TS stream over RTP. In this case you do not need an SDP file. The instructions are here:

[http://community.wowza.com/t/-/49](http://community.wowza.com/t/-/49)

1. I believe this is another MPEG-TS stream where the above instructions apply.

Just carefully follow the instructions in these posts to get it to work. Make sure you don’t miss any steps or make any assumptions. I would try the MPEG-TS case first. Will probably have better luck.

Charlie

---

_[View the full topic](https://community.wowza.com/t/slstreamer-pro-transcoder-encoder/359)._