# Single streaming url for nginx

**URL:** <https://community.wowza.com/t/single-streaming-url-for-nginx/49002>\
**Category:** Wowza Streaming Engine\
**Created:** [June 17, 2017, 9:34am UTC](https://community.wowza.com/t/single-streaming-url-for-nginx/49002 "2017-06-17T09:34:36Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Hugo\_Winder](https://avatars.discourse-cdn.com/v4/letter/h/da6949/32.png) [@Hugo\_Winder](https://community.wowza.com/u/Hugo_Winder)\
**Post date:** [June 17, 2017, 9:34am UTC](https://community.wowza.com/t/single-streaming-url-for-nginx/49002/1 "2017-06-17T09:34:36Z")

</div>

Hi!

I am trying to send an RTMP from nginx to wowza but can’t get the authentication working since I can only put in a single url.

I’ve seen solutions using ModuleOnConnect. And SecureUrl. But I do not have access to wowza to create there modules. Are there any other possibilities?

Thanks!

---

<div class="post-metadata">

**Author:** ![Jermaine\_Hemby](https://avatars.discourse-cdn.com/v4/letter/j/82dd89/32.png) [@Jermaine\_Hemby](https://community.wowza.com/u/Jermaine_Hemby)\
**Post date:** [June 24, 2017, 4:51pm UTC](https://community.wowza.com/t/single-streaming-url-for-nginx/49002/2 "2017-06-24T16:51:21Z")

</div>

Hello,

Thanks for contacting the Wowza Community!

If you look through the code for the ModuleOnConnectAuthenticate you can add a property to allow encoders to connect into the Application.xml. The source code is available here

[Doc](https://www.wowza.com/docs/how-to-do-file-based-rtmp-authentication-with-netconnection-connect-onconnectauthenticate)

If you need to modify the functionality of the module you would need to modify and compile it yourself for your needs. In your case you do, as you have a custom encoder, nginx.

Hope this helps. If any further questions, feel free to contact us.

regards,

Jermaine