# PushPublish logging in WSE 4.7.1

**URL:** https://community.wowza.com/t/pushpublish-logging-in-wse-4-7-1/49411
**Category:** Wowza Streaming Engine
**Created:** [August 10, 2017, 5:32pm UTC](https://community.wowza.com/t/pushpublish-logging-in-wse-4-7-1/49411 "2017-08-10T17:32:25Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![Carl\_Burmeister](https://avatars.discourse-cdn.com/v4/letter/c/958977/32.png) [@Carl\_Burmeister](https://community.wowza.com/u/Carl_Burmeister)
#### Post date: [August 10, 2017, 5:32pm UTC](https://community.wowza.com/t/pushpublish-logging-in-wse-4-7-1/49411/1 "2017-08-10T17:32:25Z")

</div>

We are upgrading to WSE 4.7.1 and I notice that the PushPublish.sendPackets log lines are absent from the access log. Logging level is set to INFO, but these lines are not there even when pulling DEBUG level logs from the WSE Manager GUI.

E.g. line from WSE 4.5.0 access log:

2017-08-1017:16:25 UTCcommentserver INFO 200 - PushPublishRTMP.sendPackets[rtmp…

Is there way to turn them on?

Or is there an alternate/recommended way to monitor Wowza publishing?

---

<div class="post-metadata">

### Author: ![Jermaine\_Hemby](https://avatars.discourse-cdn.com/v4/letter/j/82dd89/32.png) [@Jermaine\_Hemby](https://community.wowza.com/u/Jermaine_Hemby)
#### Post date: [August 19, 2017, 5:43pm UTC](https://community.wowza.com/t/pushpublish-logging-in-wse-4-7-1/49411/2 "2017-08-19T17:43:59Z")

</div>

Hello,

This was resolved with internal ticket: 243090

regards,

Jermaine