# PushPublish from an Edge application not working

**URL:** <https://community.wowza.com/t/pushpublish-from-an-edge-application-not-working/44112>\
**Category:** Wowza Streaming Engine\
**Created:** [October 13, 2014, 2:16pm UTC](https://community.wowza.com/t/pushpublish-from-an-edge-application-not-working/44112 "2014-10-13T14:16:34Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![jake\_penson](https://avatars.discourse-cdn.com/v4/letter/j/bbe5ce/32.png) [@jake\_penson](https://community.wowza.com/u/jake_penson)\
**Post date:** [October 13, 2014, 2:16pm UTC](https://community.wowza.com/t/pushpublish-from-an-edge-application-not-working/44112/1 "2014-10-13T14:16:34Z")

</div>

Hi All,

We are trying to pushpublish a stream from an edge application.

This is our setup:

A live origin application on Server 1 receives a stream from our encoder.

An edge application on Server 2 pulls the stream from Server 1 and has push publish module set to send to Edgecast.

We cannot get it to push the stream to Edgecast from the edge application.

If we send a stream directly to an application with PushPublish activated, it works fine.

Is there anything else needed to be able to push a stream from an Edge application?

Thanks

---

<div class="post-metadata">

**Author:** ![sal\_jefferson](https://avatars.discourse-cdn.com/v4/letter/s/6de8d8/32.png) [@sal\_jefferson](https://community.wowza.com/u/sal_jefferson)\
**Post date:** [October 13, 2014, 12:02pm UTC](https://community.wowza.com/t/pushpublish-from-an-edge-application-not-working/44112/2 "2014-10-13T12:02:58Z")

</div>

Hello there and welcome to the Wowza support forum.

You will need to create a .stream file that points to the orgin stream, start it in the stream manager or StartupStreams.xml then you can use the push publishing module to send it out. Those are the basic steps.

So you would have on the edge /content/origin.stream

Edge: StreamManger start origin.stream on edge application with MediaCaster type “liverepeater”

PushPublish module installed on edge pushes origin.stream

I hope this helps.

Salvadore

---

<div class="post-metadata">

**Author:** ![sal\_jefferson](https://avatars.discourse-cdn.com/v4/letter/s/6de8d8/32.png) [@sal\_jefferson](https://community.wowza.com/u/sal_jefferson)\
**Post date:** [October 13, 2014, 2:55pm UTC](https://community.wowza.com/t/pushpublish-from-an-edge-application-not-working/44112/3 "2014-10-13T14:55:54Z")

</div>

Wonderful! Thanks for the update and glad I could help.

Salvadore

---

<div class="post-metadata">

**Author:** ![jake\_penson](https://avatars.discourse-cdn.com/v4/letter/j/bbe5ce/32.png) [@jake\_penson](https://community.wowza.com/u/jake_penson)\
**Post date:** [October 13, 2014, 8:39pm UTC](https://community.wowza.com/t/pushpublish-from-an-edge-application-not-working/44112/4 "2014-10-13T20:39:24Z")

</div>

That’s the ticket!

All up and working now. Much appreciated!