# Push MPEG-TS over TCP

**URL:** <https://community.wowza.com/t/push-mpeg-ts-over-tcp/41504>\
**Category:** Wowza Streaming Engine\
**Created:** [January 23, 2016, 12:54am UTC](https://community.wowza.com/t/push-mpeg-ts-over-tcp/41504 "2016-01-23T00:54:10Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Tom\_T](https://avatars.discourse-cdn.com/v4/letter/t/4bbf92/32.png) [@Tom\_T](https://community.wowza.com/u/Tom_T)\
**Post date:** [January 23, 2016, 12:54am UTC](https://community.wowza.com/t/push-mpeg-ts-over-tcp/41504/1 "2016-01-23T00:54:10Z")

</div>

Hi, I am using Streaming Engine version 4.2 I would like to push to a Stream Target using MPEG-TS over TCP. Is this possible?

Thanks in advance 🙂

Tom

---

<div class="post-metadata">

**Author:** ![sal\_jefferson](https://avatars.discourse-cdn.com/v4/letter/s/6de8d8/32.png) [@sal\_jefferson](https://community.wowza.com/u/sal_jefferson)\
**Post date:** [January 25, 2016, 9:08am UTC](https://community.wowza.com/t/push-mpeg-ts-over-tcp/41504/2 "2016-01-25T09:08:44Z")

</div>

Hello.

Please take a look at this guide:

[Sample map file entries for Stream Target destinations (push publishing)](https://www.wowza.com/docs/sample-map-file-entries-for-stream-target-destinations-push-publishing%2528push-publishing%2529#MPEG2TS)

You will need set **“rtpWrap”:"true"**

Regards,

Salvadore

---

<div class="post-metadata">

**Author:** ![sal\_jefferson](https://avatars.discourse-cdn.com/v4/letter/s/6de8d8/32.png) [@sal\_jefferson](https://community.wowza.com/u/sal_jefferson)\
**Post date:** [January 26, 2016, 8:18am UTC](https://community.wowza.com/t/push-mpeg-ts-over-tcp/41504/3 "2016-01-26T08:18:12Z")

</div>

Hi Tom, I am very sorry but I was wrong.

Unfortunately Wowza can not push MPEG-TS using tcp, it’s udp only, regardless of whether rtp wrapped or not.

Again, sorry for my error in my first reply.

Salvadore

---

<div class="post-metadata">

**Author:** ![Tom\_T](https://avatars.discourse-cdn.com/v4/letter/t/4bbf92/32.png) [@Tom\_T](https://community.wowza.com/u/Tom_T)\
**Post date:** [January 25, 2016, 10:48am UTC](https://community.wowza.com/t/push-mpeg-ts-over-tcp/41504/4 "2016-01-25T10:48:40Z")

</div>

> Hello.
> 
> Please take a look at this guide:
> 
> [Sample map file entries for Stream Target destinations (push publishing)](https://www.wowza.com/docs/sample-map-file-entries-for-stream-target-destinations-push-publishing%2528push-publishing%2529#MPEG2TS)
> 
> You will need set **“rtpWrap”:“true”**
> 
> Regards,
> 
> Salvadore

Thanks. I will try this now.

Tom

---

<div class="post-metadata">

**Author:** ![Tom\_T](https://avatars.discourse-cdn.com/v4/letter/t/4bbf92/32.png) [@Tom\_T](https://community.wowza.com/u/Tom_T)\
**Post date:** [January 25, 2016, 1:09pm UTC](https://community.wowza.com/t/push-mpeg-ts-over-tcp/41504/5 "2016-01-25T13:09:03Z")

</div>

Salvadore, When I set “rtpWrap:true” (I’m doing this via the web GUI) the person on at the target is telling me it is still coming to him as UDP. See his note to me below.

Hi Tom,

I can only see udp traffic to this port:

16:29:43.970222 IP xx.xx.xxx.xxx.6980 \> 10.10.10.240.6021: UDP, length 1328

16:29:43.970387 IP xx.xx.xxx.xxx.6980 \> 10.10.10.240.6021: UDP, length 1328

16:29:43.970514 IP xx.xx.xxx.xxx.6980 \> 10.10.10.240.6021: UDP, length 1328

16:29:43.970615 IP xx.xx.xxx.xxx.6980 \> 10.10.10.240.6021: UDP, length 1328

16:29:43.970768 IP xx.xx.xxx.xxx.6980 \> 10.10.10.240.6021: UDP, length 1328

---

<div class="post-metadata">

**Author:** ![Tom\_T](https://avatars.discourse-cdn.com/v4/letter/t/4bbf92/32.png) [@Tom\_T](https://community.wowza.com/u/Tom_T)\
**Post date:** [January 26, 2016, 9:08am UTC](https://community.wowza.com/t/push-mpeg-ts-over-tcp/41504/6 "2016-01-26T09:08:56Z")

</div>

Salvadore,

Were you able to look in to this?

Tom