# Problems with Live Streaming and Repeater **URL:** \ **Category:** Wowza Streaming Engine\ **Created:** [July 29, 2021, 9:52am UTC](https://community.wowza.com/t/problems-with-live-streaming-and-repeater/93614 "2021-07-29T09:52:54Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![skrinetzki](https://sea2.discourse-cdn.com/flex002/user_avatar/community.wowza.com/skrinetzki/32/839_2.png) [@skrinetzki](https://community.wowza.com/u/skrinetzki)\ **Post date:** [July 29, 2021, 9:52am UTC](https://community.wowza.com/t/problems-with-live-streaming-and-repeater/93614/1 "2021-07-29T09:52:55Z")
Hi folks, We have the following setup: **Extron SMP 352** -\> _RTMP Push_ to **[streaming1.example.com](http://streaming1.example.com)** (_live /origin app_) **[streaming2.example.com](http://streaming2.example.com)** -\> _Live Edge_, fetches the stream from **[streaming1.example.com](http://streaming1.example.com)** **[streaming3.example.com](http://streaming3.example.com)** -\> _Live Edge_, fetches the stream from **[streaming1.example.com](http://streaming1.example.com)** The Extron device now transmits a live stream to the Wowza streaming engine [streaming1.example.com](http://streaming1.example.com) without errors. From there, the video can be accessed via a streaming group as well as a single stream without any problems. If I now try to retrieve the stream on [streaming2example.com](http://streaming2example.com), no matter if as single stream or stream group, I get a 404 error. In the log you can see the following: ``` LiveMediaStreamReceiver.connect: SSL:false url:wowz://streaming1.example.com[XXX.XXX.XXX]:1935/origin/definst_/myStream CupertinoStreamerLiveRepeaterReceiver.close[origin/_definst_/myStream:cupertinostreamingpacketizer] CupertinoStreamerLiveRepeaterReceiver.resetStream[origin/_definst_/myStream:cupertinostreamingpacketizer] HTTPStreamerAdapterCupertinoStreamer.service: Request timeout: 8000 LiveMediaStreamReceiver.doWatchdog: streamTimeout[origin/_definst_/myStream]: Resetting connection: wowz://streaming1.example.com:1935/origin/_definst_/myStream ``` All three servers can reach each other and are on the same subnet. Any ideas why there are problems here? Or is my configuration already wrong? The goal is to get load balancing among the servers. Regards Stephan ---
**Author:** ![Karel\_Boek](https://sea2.discourse-cdn.com/flex002/user_avatar/community.wowza.com/karel_boek/32/454_2.png) [@Karel\_Boek](https://community.wowza.com/u/Karel_Boek)\ **Post date:** [July 30, 2021, 4:59pm UTC](https://community.wowza.com/t/problems-with-live-streaming-and-repeater/93614/2 "2021-07-30T16:59:18Z")
If the servers are on the same subnet; are you pointing the DNS names to the internal/private IP addresses? ---
**Author:** ![skrinetzki](https://sea2.discourse-cdn.com/flex002/user_avatar/community.wowza.com/skrinetzki/32/839_2.png) [@skrinetzki](https://community.wowza.com/u/skrinetzki)\ **Post date:** [August 9, 2021, 12:46pm UTC](https://community.wowza.com/t/problems-with-live-streaming-and-repeater/93614/3 "2021-08-09T12:46:11Z")
I have tried both. Both via the IP address and via the DNS name. The connection itself also works via the ports, at least telnet, netcat and tcpdump say. ---
**Author:** ![Karel\_Boek](https://sea2.discourse-cdn.com/flex002/user_avatar/community.wowza.com/karel_boek/32/454_2.png) [@Karel\_Boek](https://community.wowza.com/u/Karel_Boek)\ **Post date:** [August 12, 2021, 3:20pm UTC](https://community.wowza.com/t/problems-with-live-streaming-and-repeater/93614/4 "2021-08-12T15:20:32Z")
Have you enabled HLS (Cupertino) on the Origin? If this is an Origin-Edge setup and you use Repeaters on the Edge, then you must have the Packetizers enabled on the Origin. ---
**Author:** ![skrinetzki](https://sea2.discourse-cdn.com/flex002/user_avatar/community.wowza.com/skrinetzki/32/839_2.png) [@skrinetzki](https://community.wowza.com/u/skrinetzki)\ **Post date:** [August 13, 2021, 9:01am UTC](https://community.wowza.com/t/problems-with-live-streaming-and-repeater/93614/5 "2021-08-13T09:01:02Z")
Yes, the Origin has an HLS source. Where do i set the Packetizers? ---
**Author:** ![Karel\_Boek](https://sea2.discourse-cdn.com/flex002/user_avatar/community.wowza.com/karel_boek/32/454_2.png) [@Karel\_Boek](https://community.wowza.com/u/Karel_Boek)\ **Post date:** [August 13, 2021, 9:30am UTC](https://community.wowza.com/t/problems-with-live-streaming-and-repeater/93614/6 "2021-08-13T09:30:20Z")
You simply enable HLS for the Application in the Engine Manager Panel of the Origin. That should enable the packetizer for HLS. Or you can edit /WowzaStreamingEngine/conf/[application name]/Application.xml: - Under `Root/Application/Streams`, find the `` tag and make sure it contains at least `cupertinostreamingpacketizer` - Under `Root/Application`, find the `` tag and make sure it at least contains `cupertinostreaming` ---
**Author:** ![skrinetzki](https://sea2.discourse-cdn.com/flex002/user_avatar/community.wowza.com/skrinetzki/32/839_2.png) [@skrinetzki](https://community.wowza.com/u/skrinetzki)\ **Post date:** [August 13, 2021, 11:12am UTC](https://community.wowza.com/t/problems-with-live-streaming-and-repeater/93614/7 "2021-08-13T11:12:57Z")
Hi, thank for your quick reply. I’ve checked the settings: The cupertionstreaming is active. Any other ideas?