# Potentially Simple Wowza Streaming Engine Fix

**URL:** <https://community.wowza.com/t/potentially-simple-wowza-streaming-engine-fix/47902>\
**Category:** Wowza Streaming Engine\
**Created:** [January 18, 2017, 6:11pm UTC](https://community.wowza.com/t/potentially-simple-wowza-streaming-engine-fix/47902 "2017-01-18T18:11:55Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Michael\_Salvador](https://avatars.discourse-cdn.com/v4/letter/m/d78d45/32.png) [@Michael\_Salvador](https://community.wowza.com/u/Michael_Salvador)\
**Post date:** [January 18, 2017, 6:11pm UTC](https://community.wowza.com/t/potentially-simple-wowza-streaming-engine-fix/47902/1 "2017-01-18T18:11:55Z")

</div>

Hello,

With the help of the Wowza example apps, I just recently implemented parts of the Wowza SDK into my iOS app with the goal of streaming to the Wowza Streaming Engine. To configure the app, I used all of these:

goCoderConfig.load(WZFrameSizePreset.preset1280x720)

goCoderConfig.username = XXXX

goCoderConfig.password = XXXX

goCoderConfig.hostAddress = XXXX

goCoderConfig.streamName = “myStream”

goCoder?.config = goCoderConfig

For the host address, I’m putting the IP address that’s located in Applications \>\> Sources in the Wowza Streaming Engine.

However, when I try to broadcast, I’m getting an error that says "Live Streaming Error - Status is idle, with error “An error occurred when trying to connect to host: [http://XXXX](http://XXXX)” (code 14)

Let me know if you have any idea what I could do to fix this.

Thanks a lot!

Mike

---

<div class="post-metadata">

**Author:** ![Jason\_Hatchett](https://sea2.discourse-cdn.com/flex002/user_avatar/community.wowza.com/jason_hatchett/32/391_2.png) [@Jason\_Hatchett](https://community.wowza.com/u/Jason_Hatchett)\
**Post date:** [May 18, 2017, 11:00am UTC](https://community.wowza.com/t/potentially-simple-wowza-streaming-engine-fix/47902/2 "2017-05-18T11:00:16Z")

</div>

Hello Michael,

For an issue like this I would suggest testing with the Stock GoCoder app for your device:  
[https://www.wowza.com/docs/wowza-gocoder-app](https://www.wowza.com/docs/wowza-gocoder-app)

This will allow you to check to see if your firewall is allowing traffic through.

If you are still facing issues please do submit a support ticket here:

[https://www.wowza.com/support/open-ticket](https://www.wowza.com/support/open-ticket)

Regards,  
Jason Hatchett