# Network Throughput Measurement

**URL:** <https://community.wowza.com/t/network-throughput-measurement/43076>\
**Category:** Wowza Streaming Engine\
**Created:** [October 22, 2014, 2:13pm UTC](https://community.wowza.com/t/network-throughput-measurement/43076 "2014-10-22T14:13:00Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Guilherme\_Nozawa](https://avatars.discourse-cdn.com/v4/letter/g/34f0e0/32.png) [@Guilherme\_Nozawa](https://community.wowza.com/u/Guilherme_Nozawa)\
**Post date:** [October 22, 2014, 2:13pm UTC](https://community.wowza.com/t/network-throughput-measurement/43076/1 "2014-10-22T14:13:00Z")

</div>

Hey Everyone,

I would like to know if there a way to measure the bytes out of each camera individually; if is there any record about that information. For example, if I have two cameras streaming how to know which uses more bytes out. I saw that in Wowza Streaming Engine Console has a graph, but it counts all bytes of all cameras in total.

---

<div class="post-metadata">

**Author:** ![sal\_jefferson](https://avatars.discourse-cdn.com/v4/letter/s/6de8d8/32.png) [@sal\_jefferson](https://community.wowza.com/u/sal_jefferson)\
**Post date:** [October 24, 2014, 9:12am UTC](https://community.wowza.com/t/network-throughput-measurement/43076/2 "2014-10-24T09:12:06Z")

</div>

Hello there,

This is done in WSEM, it’s just a live stream so navigate to “Applications \> live \> Incoming Streams \> StreamName” If it’s an IP camera StreamName will be [something].stream.

You will get the following info:

Stream Uptime

myTestStream up since 24 Oct 2014 03:32:19 PM

myTestStream up for about a few seconds

Network Throughput

Bytes In: 3499183 @ 879.220 Kbits/s

Bytes Out: 0 @ 0.000 bits/s

We don’t graph this info per stream so it’s only showing the real-time stats.

I hope this is helpful.

Salvadore

---

<div class="post-metadata">

**Author:** ![Guilherme\_Nozawa](https://avatars.discourse-cdn.com/v4/letter/g/34f0e0/32.png) [@Guilherme\_Nozawa](https://community.wowza.com/u/Guilherme_Nozawa)\
**Post date:** [October 24, 2014, 4:35pm UTC](https://community.wowza.com/t/network-throughput-measurement/43076/3 "2014-10-24T16:35:00Z")

</div>

Hey Salvadore,

Thank you for reply.

Then I saw that had this information in real time via Wowza Streaming Engine Manager, but I needed to know how many bytes out a client used for a month or a day in total for example. Are bytes out recorded in somewhere for use?

Grateful already,

Guilherme.