# Monitor WOWZA via SNMP

**URL:** <https://community.wowza.com/t/monitor-wowza-via-snmp/640>\
**Category:** Wowza Streaming Engine\
**Created:** [June 4, 2009, 2:05pm UTC](https://community.wowza.com/t/monitor-wowza-via-snmp/640 "2009-06-04T14:05:30Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://sea2.discourse-cdn.com/flex002/user_avatar/community.wowza.com/system/32/447_2.png) [@system](https://community.wowza.com/u/system)\
**Post date:** [June 4, 2009, 2:05pm UTC](https://community.wowza.com/t/monitor-wowza-via-snmp/640/1 "2009-06-04T14:05:30Z")

</div>

any snmp mibs availalbe for Wowza pro?

tia

S

---

<div class="post-metadata">

**Author:** ![Charlie\_Good](https://sea2.discourse-cdn.com/flex002/user_avatar/community.wowza.com/charlie_good/32/383_2.png) [@Charlie\_Good](https://community.wowza.com/u/Charlie_Good)\
**Post date:** [May 13, 2010, 3:25am UTC](https://community.wowza.com/t/monitor-wowza-via-snmp/640/2 "2010-05-13T03:25:40Z")

</div>

Take a look at HTTPProviders info in User’s Guide. There are built-in providers at http://[wowza-ip-address]:8086.

Charlie

---

<div class="post-metadata">

**Author:** ![Janko\_Matko](https://avatars.discourse-cdn.com/v4/letter/j/f19dbf/32.png) [@Janko\_Matko](https://community.wowza.com/u/Janko_Matko)\
**Post date:** [May 13, 2010, 12:14pm UTC](https://community.wowza.com/t/monitor-wowza-via-snmp/640/3 "2010-05-13T12:14:10Z")

</div>

Thats what I’d like to know too.

Would be great if it would be possible to add current vhost connection number, bandiwth, etc.

Anyone?

---

<div class="post-metadata">

**Author:** ![Charlie\_Good](https://sea2.discourse-cdn.com/flex002/user_avatar/community.wowza.com/charlie_good/32/383_2.png) [@Charlie\_Good](https://community.wowza.com/u/Charlie_Good)\
**Post date:** [May 13, 2010, 3:16am UTC](https://community.wowza.com/t/monitor-wowza-via-snmp/640/4 "2010-05-13T03:16:09Z")

</div>

It is not available over SNMP. It is available using an HTTPProvider or over JConsole/JMX.

Charlie

---

<div class="post-metadata">

**Author:** ![Richard\_Lanham](https://avatars.discourse-cdn.com/v4/letter/r/c68b51/32.png) [@Richard\_Lanham](https://community.wowza.com/u/Richard_Lanham)\
**Post date:** [May 13, 2010, 11:27am UTC](https://community.wowza.com/t/monitor-wowza-via-snmp/640/5 "2010-05-13T11:27:39Z")

</div>

There are three built-in HTTProviders:

http://[wowza-address]:8068/connectioninfo

http://[wowza-address]:8068/connectioncounts

http://[wowza-address]:8068/serverinfo

You need to set a username/password in the /conf/admin.password file to access these pages.

To customize, you can start here:

[http://community.wowza.com/t/-/60](http://community.wowza.com/t/-/60)

Richard

---

<div class="post-metadata">

**Author:** ![Janko\_Matko](https://avatars.discourse-cdn.com/v4/letter/j/f19dbf/32.png) [@Janko\_Matko](https://community.wowza.com/u/Janko_Matko)\
**Post date:** [May 13, 2010, 12:17pm UTC](https://community.wowza.com/t/monitor-wowza-via-snmp/640/6 "2010-05-13T12:17:57Z")

</div>

How can we access that info over http?

---

<div class="post-metadata">

**Author:** ![Lukasz\_Grabowski](https://avatars.discourse-cdn.com/v4/letter/l/57b2e6/32.png) [@Lukasz\_Grabowski](https://community.wowza.com/u/Lukasz_Grabowski)\
**Post date:** [September 7, 2017, 10:29am UTC](https://community.wowza.com/t/monitor-wowza-via-snmp/640/7 "2017-09-07T10:29:43Z")

</div>

Wowza now supports SNMP directly

[https://www.wowza.com/docs/how-to-use-snmp-in-wowza-streaming-engine](https://www.wowza.com/docs/how-to-use-snmp-in-wowza-streaming-engine)