# Live Repeater - SanJose & Cupertino streaming

**URL:** <https://community.wowza.com/t/live-repeater-sanjose-cupertino-streaming/38375>\
**Category:** Wowza Streaming Engine\
**Created:** [May 30, 2012, 12:09pm UTC](https://community.wowza.com/t/live-repeater-sanjose-cupertino-streaming/38375 "2012-05-30T12:09:46Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![Karl\_Hindson](https://avatars.discourse-cdn.com/v4/letter/k/f1d935/32.png) [@Karl\_Hindson](https://community.wowza.com/u/Karl_Hindson)\
**Post date:** [May 30, 2012, 12:09pm UTC](https://community.wowza.com/t/live-repeater-sanjose-cupertino-streaming/38375/1 "2012-05-30T12:09:46Z")

</div>

Hi,

I have setup a origin server and a separate edge server. I have tested the rtmp streams successfully and can view using the simple published stream name.

I have followed the required steps to allow iOS & Flash HTTP streaming, but cannot get these to work. I just see:

FLASH:

HTTPStreamerAdapterSanJoseStreamer.service: Request timeout: 8000

iOS:

HTTPStreamerAdapterCupertinoStreamer.service: Request timeout: 8000

The forum posts I have found indicate it could be possible network issues, however I can successfully watch the rtmp streams without any issues.

Appreciate any help.

Thanks

---

<div class="post-metadata">

**Author:** ![Richard\_Lanham](https://avatars.discourse-cdn.com/v4/letter/r/c68b51/32.png) [@Richard\_Lanham](https://community.wowza.com/u/Richard_Lanham)\
**Post date:** [May 30, 2012, 1:14pm UTC](https://community.wowza.com/t/live-repeater-sanjose-cupertino-streaming/38375/2 "2012-05-30T13:14:41Z")

</div>

Have you set up the correct LiveStreamPacketizers on the origin and the edge. They are different. Take a look at this guide:

[https://www.wowza.com/docs/how-to-configure-a-live-stream-repeater](https://www.wowza.com/docs/how-to-configure-a-live-stream-repeater)

If you are doing multi-bitrate streaming, and there are other good reasons to use this alternative configuration in which packetizing occurs on the edge.

[https://www.wowza.com/docs/how-to-lock-multi-bitrate-streams-on-live-stream-repeater-edge](https://www.wowza.com/docs/how-to-lock-multi-bitrate-streams-on-live-stream-repeater-edge)

Richard

---

<div class="post-metadata">

**Author:** ![Richard\_Lanham](https://avatars.discourse-cdn.com/v4/letter/r/c68b51/32.png) [@Richard\_Lanham](https://community.wowza.com/u/Richard_Lanham)\
**Post date:** [May 30, 2012, 8:16pm UTC](https://community.wowza.com/t/live-repeater-sanjose-cupertino-streaming/38375/3 "2012-05-30T20:16:41Z")

</div>

It does appear to be a connectivity issue between the edge and the origin. I assume you see those log messages on the edge logs. If you can run a browser on the edge, check:

http://[wowza-origin-address]:1935

Richard

---

<div class="post-metadata">

**Author:** ![Richard\_Lanham](https://avatars.discourse-cdn.com/v4/letter/r/c68b51/32.png) [@Richard\_Lanham](https://community.wowza.com/u/Richard_Lanham)\
**Post date:** [May 30, 2012, 9:11pm UTC](https://community.wowza.com/t/live-repeater-sanjose-cupertino-streaming/38375/4 "2012-05-30T21:11:49Z")

</div>

Great! Glad it’s working. Thanks for the update

Richard

---

<div class="post-metadata">

**Author:** ![Karl\_Hindson](https://avatars.discourse-cdn.com/v4/letter/k/f1d935/32.png) [@Karl\_Hindson](https://community.wowza.com/u/Karl_Hindson)\
**Post date:** [May 30, 2012, 2:19pm UTC](https://community.wowza.com/t/live-repeater-sanjose-cupertino-streaming/38375/5 "2012-05-30T14:19:57Z")

</div>

Hi,

I have the following, which look to be correct:

Edge:

sanjosestreamingrepeater, cupertinostreamingrepeater, smoothstreamingrepeater

Origin:

cupertinostreamingpacketizer, smoothstreamingpacketizer, sanjosestreamingpacketizer

We’re not currently doing multi-bitrate streaming, though I will look at this alternative config for future reference.

---

<div class="post-metadata">

**Author:** ![Karl\_Hindson](https://avatars.discourse-cdn.com/v4/letter/k/f1d935/32.png) [@Karl\_Hindson](https://community.wowza.com/u/Karl_Hindson)\
**Post date:** [May 30, 2012, 5:14pm UTC](https://community.wowza.com/t/live-repeater-sanjose-cupertino-streaming/38375/6 "2012-05-30T17:14:58Z")

</div>

The origin is actually:

cupertinostreamingpacketizer, smoothstreamingpacketizer, sanjosestreamingpacketizer

The space above was a typo.

I still get the timeout, any ideas?

Thanks

---

<div class="post-metadata">

**Author:** ![Karl\_Hindson](https://avatars.discourse-cdn.com/v4/letter/k/f1d935/32.png) [@Karl\_Hindson](https://community.wowza.com/u/Karl_Hindson)\
**Post date:** [May 30, 2012, 8:38pm UTC](https://community.wowza.com/t/live-repeater-sanjose-cupertino-streaming/38375/7 "2012-05-30T20:38:46Z")

</div>

That works giving the following: Wowza Media Server 3 Monthly Edition 3.1.1 build1479

I also tried that on the edge & I get the same.

I can pull direct off the origin with the following server address: rtmp://origin.ourdomain.net:1935/liveorigin

This matches our edge config: rtmp://origin.ourdomain.net:1935/liveorigin

I can pull direct off the edge: rtmp://edge.ourdomain.net:1935/liveedge/

And yes, I see those errors on the edge. The origin gets the request and I see:

MediaStreamHTTPStreamerRepeaterOriginPlay.initLiveStreamRepeating: playerClass: com.wowza.wms.httpstreamer.cupertinostreaming.liverepeater.CupertinoStreamerLiveRepeaterPlayer

---

<div class="post-metadata">

**Author:** ![Karl\_Hindson](https://avatars.discourse-cdn.com/v4/letter/k/f1d935/32.png) [@Karl\_Hindson](https://community.wowza.com/u/Karl_Hindson)\
**Post date:** [May 30, 2012, 8:54pm UTC](https://community.wowza.com/t/live-repeater-sanjose-cupertino-streaming/38375/8 "2012-05-30T20:54:33Z")

</div>

Ok… Strangest thing. I just restarted the origin and it’s started working!!

Was starting to frustrate me as it all looked like it should work. I need to do some more tests, but so far, so good!

Thanks
