# Limited transcoder usage parameters

**URL:** https://community.wowza.com/t/limited-transcoder-usage-parameters/35928
**Category:** Wowza Streaming Engine
**Created:** [November 25, 2015, 10:47am UTC](https://community.wowza.com/t/limited-transcoder-usage-parameters/35928 "2015-11-25T10:47:09Z")
**Posts on this page:** 4
**Page:** 1

<div class="post-metadata">

### Author: ![Radoslaw\_Przybyl](https://avatars.discourse-cdn.com/v4/letter/r/a88e4f/32.png) [@Radoslaw\_Przybyl](https://community.wowza.com/u/Radoslaw_Przybyl)
#### Post date: [November 25, 2015, 10:47am UTC](https://community.wowza.com/t/limited-transcoder-usage-parameters/35928/1 "2015-11-25T10:47:09Z")

</div>

My WSE transcodes only first two incoming streams. It leaves following streams untouched. I do not remember where, but probably I have set up limiter for transcoder concurent threads. Now I am lost and can not remove this parameter. Is (was) there a parameter limiting transcoder usage (and where)?

Help!

---

<div class="post-metadata">

### Author: ![sal\_jefferson](https://avatars.discourse-cdn.com/v4/letter/s/6de8d8/32.png) [@sal\_jefferson](https://community.wowza.com/u/sal_jefferson)
#### Post date: [November 25, 2015, 8:38am UTC](https://community.wowza.com/t/limited-transcoder-usage-parameters/35928/2 "2015-11-25T08:38:26Z")

</div>

Hello there.

It sounds like you are running a trial/developer version of Wowza. Is this the case?

Regards,

Salvadore

---

<div class="post-metadata">

### Author: ![Radoslaw\_Przybyl](https://avatars.discourse-cdn.com/v4/letter/r/a88e4f/32.png) [@Radoslaw\_Przybyl](https://community.wowza.com/u/Radoslaw_Przybyl)
#### Post date: [November 25, 2015, 6:38pm UTC](https://community.wowza.com/t/limited-transcoder-usage-parameters/35928/3 "2015-11-25T18:38:19Z")

</div>

> Hello there.
> 
> It sounds like you are running a trial/developer version of Wowza. Is this the case?
> 
> Regards,
> 
> Salvadore

No, it was setting. I remembered correctly I saw it.

Now when I run pro, I do not need to stop transcoding or bancrupt. But I set up it to 2 previously. Unfortunattely setting is located on VirtualHost settings. (“Server \> Virtual Host Setup” page. “Transcoder Session Limit”). Thanks to support I have found it and disabled.

Regards

---

<div class="post-metadata">

### Author: ![sal\_jefferson](https://avatars.discourse-cdn.com/v4/letter/s/6de8d8/32.png) [@sal\_jefferson](https://community.wowza.com/u/sal_jefferson)
#### Post date: [November 26, 2015, 8:47am UTC](https://community.wowza.com/t/limited-transcoder-usage-parameters/35928/4 "2015-11-26T08:47:29Z")

</div>

Oh, great! Thanks for the update and glad this is sorted.

Regards,

Salvadore