# Kiloview E1 SRT ingest not working

**URL:** <https://community.wowza.com/t/kiloview-e1-srt-ingest-not-working/94400>\
**Category:** Wowza Streaming Engine\
**Tags:** srt\
**Created:** [December 30, 2021, 9:13pm UTC](https://community.wowza.com/t/kiloview-e1-srt-ingest-not-working/94400 "2021-12-30T21:13:52Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Branden\_Spikes](https://avatars.discourse-cdn.com/v4/letter/b/57b2e6/32.png) [@Branden\_Spikes](https://community.wowza.com/u/Branden_Spikes)\
**Post date:** [December 30, 2021, 9:13pm UTC](https://community.wowza.com/t/kiloview-e1-srt-ingest-not-working/94400/1 "2021-12-30T21:13:52Z")

</div>

I’m trying to set up SRT streaming from a Kiloview E1 encoder to Wowza. However, I’m unable to get an active stream going. I can verify that my encoder is putting out video- I can view the SRT stream with VLC. But I’ve tried both ways caller/listener, listener/caller, rendezvous etc., and can’t get an active stream. RTSP and RTMP (and TS-UDP) work just fine…any ideas?

---

<div class="post-metadata">

**Author:** ![Connessione](https://avatars.discourse-cdn.com/v4/letter/c/43a26b/32.png) [@Connessione](https://community.wowza.com/u/Connessione)\
**Post date:** [January 1, 2022, 3:40pm UTC](https://community.wowza.com/t/kiloview-e1-srt-ingest-not-working/94400/2 "2022-01-01T15:40:42Z")

</div>

Have you checked out the [official documentation](https://www.wowza.com/docs/ingest-and-publish-an-srt-stream-with-wowza-streaming-engine) on this. There might be something small like a stream setting or something holding it back from working.

---

<div class="post-metadata">

**Author:** ![Karel\_Boek](https://sea2.discourse-cdn.com/flex002/user_avatar/community.wowza.com/karel_boek/32/454_2.png) [@Karel\_Boek](https://community.wowza.com/u/Karel_Boek)\
**Post date:** [January 1, 2022, 8:41pm UTC](https://community.wowza.com/t/kiloview-e1-srt-ingest-not-working/94400/3 "2022-01-01T20:41:36Z")

</div>

Anything in the Wowza logs that indicates that the encoder is trying to connect over SRT?

The Wowza server is set up as listener so your Encoder must be set up as caller. Also check any firewalls and make sure the chosen UDP port is open outbound from your Encoder network inbound to your Wowza server. That includes firewalls on the server itself, e.g. firewalld (CentOS), ufw (Ubuntu), Windows Security, etc.