# How to relay a UDP multicast stream

**URL:** https://community.wowza.com/t/how-to-relay-a-udp-multicast-stream/36758
**Category:** Wowza Streaming Engine
**Created:** [June 8, 2011, 10:36am UTC](https://community.wowza.com/t/how-to-relay-a-udp-multicast-stream/36758 "2011-06-08T10:36:04Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![Vince\_Cornett](https://avatars.discourse-cdn.com/v4/letter/v/e9bcb4/32.png) [@Vince\_Cornett](https://community.wowza.com/u/Vince_Cornett)
#### Post date: [June 8, 2011, 10:36am UTC](https://community.wowza.com/t/how-to-relay-a-udp-multicast-stream/36758/1 "2011-06-08T10:36:04Z")

</div>

Here is the setup. Wowza server running on Linux connected to a network segment with an MPEG4 enoder that is outputting a live UDP (not RTP or RTSP) multicast stream. I would like to configure the wowza server to pickup the stream and then unicast it to multiple destinations.

I’m not a linux admin so any help would be appreciated.

---

<div class="post-metadata">

### Author: ![Richard\_Lanham](https://avatars.discourse-cdn.com/v4/letter/r/c68b51/32.png) [@Richard\_Lanham](https://community.wowza.com/u/Richard_Lanham)
#### Post date: [June 9, 2011, 8:36pm UTC](https://community.wowza.com/t/how-to-relay-a-udp-multicast-stream/36758/2 "2011-06-09T20:36:07Z")

</div>

Take a look at this Article:

[https://www.wowza.com/docs/how-to-publish-and-play-a-live-stream-mpeg-ts-based-encoder](https://www.wowza.com/docs/how-to-publish-and-play-a-live-stream-mpeg-ts-based-encoder))

Richard