# Hardware encoder question

**URL:** https://community.wowza.com/t/hardware-encoder-question/33681
**Category:** Wowza Streaming Engine
**Created:** [October 9, 2012, 12:05am UTC](https://community.wowza.com/t/hardware-encoder-question/33681 "2012-10-09T00:05:31Z")
**Posts on this page:** 6
**Page:** 1

<div class="post-metadata">

### Author: ![Juan\_Manuel\_Irigaray](https://avatars.discourse-cdn.com/v4/letter/j/c4cdca/32.png) [@Juan\_Manuel\_Irigaray](https://community.wowza.com/u/Juan_Manuel_Irigaray)
#### Post date: [October 9, 2012, 12:05am UTC](https://community.wowza.com/t/hardware-encoder-question/33681/1 "2012-10-09T00:05:31Z")

</div>

Hi, we are looking to buy a hardware encoder appliance with hdmi inputs.

We saw some encoders from a chinese distributor, these:

Support for IP unicast and multicast network

Support spts/mpts over udp-ip

4way HDMI HD signal, each encoding 0.5-20Mbps

Support local and remote control network, and also support network upgrade

Variable PCR re-correcting for different network

1080i,720p HD video resolution

Built-in time base correction and video pre-processing

PID modifying and PSI/SI generating

DVB Interface: 2x ASI, Comply to EN 50083-9 ASI Standard, BNC, 75Ω

Output Format: 188bytes

IP output: 100M Base-T Ethernet interface UDP

Is this encoder compatible with wowza?

Do you know some hardware encoder with 2 or 4 hdmi inputs that works with wowza? We tried to contact haivision but the didnt answer, our budget is around 3k to 6k usd for this.

Thanks

---

<div class="post-metadata">

### Author: ![Ahmed\_Amimi](https://avatars.discourse-cdn.com/v4/letter/a/85e7bf/32.png) [@Ahmed\_Amimi](https://community.wowza.com/u/Ahmed_Amimi)
#### Post date: [October 8, 2012, 8:44pm UTC](https://community.wowza.com/t/hardware-encoder-question/33681/2 "2012-10-08T20:44:33Z")

</div>

We can provide you Analog/Composite encoders which can go upto SD quality @ 4Mb

You can see the results here: www.dabang.pk/test

Its CIF quality 352×288 @ 350bit rate

Our encoders are compatible with: wowza/fms/red5/youtubelive/livestream/etc…

Our encoder support RTMP/RTSP/TS stream.

You can get 2 output stream for same server. One high quality other low for mobile.

Encoder price is $500 with purchase of 20 unit atleast.

-Mamoor

www.eboundservices.com

mamoor@eboundservices.com

---

<div class="post-metadata">

### Author: ![Juan\_Manuel\_Irigaray](https://avatars.discourse-cdn.com/v4/letter/j/c4cdca/32.png) [@Juan\_Manuel\_Irigaray](https://community.wowza.com/u/Juan_Manuel_Irigaray)
#### Post date: [October 9, 2012, 11:01am UTC](https://community.wowza.com/t/hardware-encoder-question/33681/3 "2012-10-09T11:01:40Z")

</div>

Thanks, we need sd too (but the hdmi version is a requeriment too for the other encoder)

Your hardware can deinterlace? And is fully compatible with wowza?

Thanks

> We can provide you Analog/Composite encoders which can go upto SD quality @ 4Mb
> 
> You can see the results here: www.dabang.pk/test
> 
> Its CIF quality 352×288 @ 350bit rate
> 
> Our encoders are compatible with: wowza/fms/red5/youtubelive/livestream/etc…
> 
> Our encoder support RTMP/RTSP/TS stream.
> 
> You can get 2 output stream for same server. One high quality other low for mobile.
> 
> Encoder price is $500 with purchase of 20 unit atleast.
> 
> -Mamoor
> 
> www.eboundservices.com
> 
> mamoor@eboundservices.com

---

<div class="post-metadata">

### Author: ![Ahmed\_Amimi](https://avatars.discourse-cdn.com/v4/letter/a/85e7bf/32.png) [@Ahmed\_Amimi](https://community.wowza.com/u/Ahmed_Amimi)
#### Post date: [October 9, 2012, 6:07am UTC](https://community.wowza.com/t/hardware-encoder-question/33681/4 "2012-10-09T06:07:13Z")

</div>

Yes it can and its 100% compatible with wowza.

I sent u the link for test, please check: www.dabang.pk/test (CIF quality).

-Mamoor

---

<div class="post-metadata">

### Author: ![Baguio\_bb](https://avatars.discourse-cdn.com/v4/letter/b/dfb087/32.png) [@Baguio\_bb](https://community.wowza.com/u/Baguio_bb)
#### Post date: [December 16, 2017, 4:24am UTC](https://community.wowza.com/t/hardware-encoder-question/33681/5 "2017-12-16T04:24:19Z")

</div>

i think you need to [do dear](https://www.dodear.info/) from asap. regards

---

<div class="post-metadata">

### Author: ![Neal\_Xu](https://avatars.discourse-cdn.com/v4/letter/n/91b2a8/32.png) [@Neal\_Xu](https://community.wowza.com/u/Neal_Xu)
#### Post date: [December 19, 2017, 4:05pm UTC](https://community.wowza.com/t/hardware-encoder-question/33681/6 "2017-12-19T16:05:46Z")

</div>

Hi…i am a new user here. As per my knowledgeyou can use app-sink/app-src to develop your application. For OMX interface, library should be ok, but we don’t have official support, you can refer the source code from gst-omx component if you insist in this way.

[circuit card assembly](https://www.7pcb.com/Circuit-Card-Assembly.php)
