# Flash Player crashes on RTSP Re-streaming from D-Link DCS-942L and TrendNET TV-IP572W

**URL:** <https://community.wowza.com/t/flash-player-crashes-on-rtsp-re-streaming-from-d-link-dcs-942l-and-trendnet-tv-ip572w/37117>\
**Category:** Wowza Streaming Engine\
**Created:** [April 11, 2013, 2:02pm UTC](https://community.wowza.com/t/flash-player-crashes-on-rtsp-re-streaming-from-d-link-dcs-942l-and-trendnet-tv-ip572w/37117 "2013-04-11T14:02:13Z")\
**Posts on this page:** 17\
**Page:** 1

<div class="post-metadata">

**Author:** ![Dan\_Burkett](https://avatars.discourse-cdn.com/v4/letter/d/838e76/32.png) [@Dan\_Burkett](https://community.wowza.com/u/Dan_Burkett)\
**Post date:** [April 11, 2013, 2:02pm UTC](https://community.wowza.com/t/flash-player-crashes-on-rtsp-re-streaming-from-d-link-dcs-942l-and-trendnet-tv-ip572w/37117/1 "2013-04-11T14:02:13Z")

</div>

Hi,

I’m trying to re-stream from 2 H.264 IP cameras: D-Link DCS-942L and TrendNET TV-IP572W. Wowza can connect to the cameras, and I can view the stream from Wowza using the RTSP URL in VLC.

When I try to view the RTMP stream in Flash Player, the player crashes. I captured the following meta data from the Flash Player before the player crashes:

```auto
D-LINK
meta
(Object)#0
  displayHeight = 480
  displayWidth = 640
  frameHeight = 480
  framerate = 15
  frameWidth = 640
  height = 480
  rtpsessioninfo = (Object)#1
    attributes = (Object)#2
      charset = "Shift_JIS"
      etag = "1234567890"
      range = "npt=now-"
    name = "DCS-942L"
    origin = "CV-RTSPHandler 1123412 0 IN IP4 192.168.1.204"
    protocolversion = "0"
    timing = "0 0"
  trackinfo = (Array)#3
    [0] (Object)#4
      description = "{H264CodecConfigInfo: codec:H264, profile:Baseline, level:3.0, frameSize:640x480, displaySize:640x480, frameRate:15.0}"
      language = "eng"
      profile-level-id = "42a01e"
      sampledescription = (Array)#5
        [0] (Object)#6
          sampletype = "H264"
      sprop-parameter-sets = "Z0IAHukBQHt/4AAAAwAcSABt3QAM3+YA2IEJQA==,aM4xUg=="
      timescale = 90000
      type = "video"
  videocodecid = "avc1"
  width = 640
TrendNET
meta
(Object)#0
  displayHeight = 400
  displayWidth = 640
  frameHeight = 400
  framerate = 15
  frameWidth = 640
  height = 400
  rtpsessioninfo = (Object)#1
    attributes = (Object)#2
      charset = "Shift_JIS"
      etag = "1234567890"
      range = "npt=now-"
    name = "TV-IP572W"
    origin = "CV-RTSPHandler 1123412 0 IN IP4 192.168.1.201"
    protocolversion = "0"
    timing = "0 0"
  trackinfo = (Array)#3
    [0] (Object)#4
      description = "{H264CodecConfigInfo: codec:H264, profile:Baseline, level:3.0, frameSize:640x400, displaySize:640x400, frameRate:15.0}"
      language = "eng"
      profile-level-id = "42a01e"
      sampledescription = (Array)#5
        [0] (Object)#6
          sampletype = "H264"
      sprop-parameter-sets = "Z0IAHukBQGd/4AAAAwAcSABt3QAM3+YA2IEJQA==,aM4xUg=="
      timescale = 90000
      type = "video"
  videocodecid = "avc1"
  width = 640

```

Any ideas?

Thanks,

Dan

---

<div class="post-metadata">

**Author:** ![Dan\_Burkett](https://avatars.discourse-cdn.com/v4/letter/d/838e76/32.png) [@Dan\_Burkett](https://community.wowza.com/u/Dan_Burkett)\
**Post date:** [April 12, 2013, 7:21am UTC](https://community.wowza.com/t/flash-player-crashes-on-rtsp-re-streaming-from-d-link-dcs-942l-and-trendnet-tv-ip572w/37117/2 "2013-04-12T07:21:53Z")

</div>

I can provide an mp4 file that manifests the problem as well as a live stream if it will help.

Thanks,

Dan

---

<div class="post-metadata">

**Author:** ![Richard\_Lanham](https://avatars.discourse-cdn.com/v4/letter/r/c68b51/32.png) [@Richard\_Lanham](https://community.wowza.com/u/Richard_Lanham)\
**Post date:** [April 12, 2013, 12:34pm UTC](https://community.wowza.com/t/flash-player-crashes-on-rtsp-re-streaming-from-d-link-dcs-942l-and-trendnet-tv-ip572w/37117/3 "2013-04-12T12:34:00Z")

</div>

Dan,

First, make sure you are configured following this guide:

[https://www.wowza.com/docs/how-to-re-stream-video-from-an-ip-camera-rtsp-rtp-re-streaming](https://www.wowza.com/docs/how-to-re-stream-video-from-an-ip-camera-rtsp-rtp-re-streaming)

I would try adding the Application.xml /Streams nalUnitFilter Property (from the [IP camera guide](https://www.wowza.com/docs/how-to-re-stream-video-from-an-ip-camera-rtsp-rtp-re-streaming%28RTSP-RTP-re-streaming%29))

```auto
<Property>
    <Name>nalUnitFilter</Name>
    <Value>13</Value>
    <Type>Integer</Type>
</Property>

```

The nalUnitFilter Property is specific to Flash playback problems

And you might try the Application.xml /MediaCaster Property rtspFilterUnknownTracks

If that does not help, yes, send the source rtsp url to support@wowza.com. Include a link to this thread for reference.

Richard

---

<div class="post-metadata">

**Author:** ![Richard\_Lanham](https://avatars.discourse-cdn.com/v4/letter/r/c68b51/32.png) [@Richard\_Lanham](https://community.wowza.com/u/Richard_Lanham)\
**Post date:** [April 12, 2013, 1:55pm UTC](https://community.wowza.com/t/flash-player-crashes-on-rtsp-re-streaming-from-d-link-dcs-942l-and-trendnet-tv-ip572w/37117/4 "2013-04-12T13:55:31Z")

</div>

Dan,

What is the video codec? Playback the rtsp source in VLC and check Tools \> Codec Info. What do you see?

Richard

---

<div class="post-metadata">

**Author:** ![Richard\_Lanham](https://avatars.discourse-cdn.com/v4/letter/r/c68b51/32.png) [@Richard\_Lanham](https://community.wowza.com/u/Richard_Lanham)\
**Post date:** [April 12, 2013, 2:38pm UTC](https://community.wowza.com/t/flash-player-crashes-on-rtsp-re-streaming-from-d-link-dcs-942l-and-trendnet-tv-ip572w/37117/5 "2013-04-12T14:38:08Z")

</div>

Dan,

Okay, thanks for that info. The codec is okay. Two video blocks like that might indicate UDP ports are blocked, but in that case they are usually identical. I don’t see any evidence of it, but are there two video tracks in that stream?

Please go ahead and send the source rtsp url, and that file, to support@wowza.com. Include a link to this thread for reference.

Richard

---

<div class="post-metadata">

**Author:** ![Richard\_Lanham](https://avatars.discourse-cdn.com/v4/letter/r/c68b51/32.png) [@Richard\_Lanham](https://community.wowza.com/u/Richard_Lanham)\
**Post date:** [April 12, 2013, 3:20pm UTC](https://community.wowza.com/t/flash-player-crashes-on-rtsp-re-streaming-from-d-link-dcs-942l-and-trendnet-tv-ip572w/37117/6 "2013-04-12T15:20:17Z")

</div>

The long delay indicates that UDP ports are not open in your firewall and/or not properly mapped in your network to the server running Wowza. Take a look at this guide:

[https://www.wowza.com/docs/how-to-troubleshoot-rtsp-rtp-playback](https://www.wowza.com/docs/how-to-troubleshoot-rtsp-rtp-playback)

If you watch the codec info window after you start playback in VLC you should see the first block right away, then the 2nd one appear ~10 seconds later just as playback starts. Note that many Android devices cannot fail-over to TCP, so they just won’t work if UDP ports are blocked. For routers you have to port-forward and there is guidance for many routers at [portforward.com](http://portforward.com)

Also, sorry, should have pointed to this as well, if you are being a router or NAT this is important:

[https://www.wowza.com/docs/how-to-set-up-an-application-for-rtsp-rtp-streaming](https://www.wowza.com/docs/how-to-set-up-an-application-for-rtsp-rtp-streaming)

Richard

---

<div class="post-metadata">

**Author:** ![Richard\_Lanham](https://avatars.discourse-cdn.com/v4/letter/r/c68b51/32.png) [@Richard\_Lanham](https://community.wowza.com/u/Richard_Lanham)\
**Post date:** [April 12, 2013, 3:45pm UTC](https://community.wowza.com/t/flash-player-crashes-on-rtsp-re-streaming-from-d-link-dcs-942l-and-trendnet-tv-ip572w/37117/7 "2013-04-12T15:45:41Z")

</div>

Dan,

With these changes, is perhaps the Flash crash problem fixed?

Richard

---

<div class="post-metadata">

**Author:** ![Robert\_Prokes](https://avatars.discourse-cdn.com/v4/letter/r/90ced4/32.png) [@Robert\_Prokes](https://community.wowza.com/u/Robert_Prokes)\
**Post date:** [April 12, 2013, 7:30pm UTC](https://community.wowza.com/t/flash-player-crashes-on-rtsp-re-streaming-from-d-link-dcs-942l-and-trendnet-tv-ip572w/37117/8 "2013-04-12T19:30:35Z")

</div>

Daniel, how do you get the metadata from flash player?

Thanks, Rob

---

<div class="post-metadata">

**Author:** ![Robert\_Prokes](https://avatars.discourse-cdn.com/v4/letter/r/90ced4/32.png) [@Robert\_Prokes](https://community.wowza.com/u/Robert_Prokes)\
**Post date:** [April 12, 2013, 8:02pm UTC](https://community.wowza.com/t/flash-player-crashes-on-rtsp-re-streaming-from-d-link-dcs-942l-and-trendnet-tv-ip572w/37117/9 "2013-04-12T20:02:26Z")

</div>

Thanks.

We know the issue which you are describing as well. Some specific IP cameras crash jw player. This is what helped in most situations:

1. changing to udp mode

2. adding rtpIgnoreProfileLevelId true, rtspFilterUnknownTracks true, rtspValidationFrequency 0, nalUnitFilter 13,

3. sometimes helped AVSyncMethod change to systemclock

Hope this helps.

---

<div class="post-metadata">

**Author:** ![Dan\_Burkett](https://avatars.discourse-cdn.com/v4/letter/d/838e76/32.png) [@Dan\_Burkett](https://community.wowza.com/u/Dan_Burkett)\
**Post date:** [April 12, 2013, 8:42am UTC](https://community.wowza.com/t/flash-player-crashes-on-rtsp-re-streaming-from-d-link-dcs-942l-and-trendnet-tv-ip572w/37117/10 "2013-04-12T08:42:36Z")

</div>

Thanks Richard - Those properties don’t seem to make a difference.

The only thing that helps is to cut out the video track. Then I can stream the audio over RTMP with no issues.

rtspStreamAudioTrack

true

Boolean

rtspStreamVideoTrack

false

Boolean

I’ll go over the guide again to make sure there are no other properties that I haven’t tried, then I’ll send the source mp4 file and sample URLs to the support email.

Thanks,

Dan

---

<div class="post-metadata">

**Author:** ![Dan\_Burkett](https://avatars.discourse-cdn.com/v4/letter/d/838e76/32.png) [@Dan\_Burkett](https://community.wowza.com/u/Dan_Burkett)\
**Post date:** [April 12, 2013, 9:11am UTC](https://community.wowza.com/t/flash-player-crashes-on-rtsp-re-streaming-from-d-link-dcs-942l-and-trendnet-tv-ip572w/37117/11 "2013-04-12T09:11:30Z")

</div>

Hi Richard,

Both the D-Link DCS-942L and TrendNET TV-IP572W report the exact same info in VLC under Tools -\> Codec:

```auto
Stream 0
  Type: Video
  Codec: H264 - MPEG-4 AVC (part 10) (h264)
Stream 1
  Type: Video
  Codec: H264 - MPEG-4 AVC (part 10) (h264)
  Resolution: 640x480 (TrendNET uses 640x400)
  Frame rate: 30
  Decoded format: Planar 4:2:0 YUV full scale

```

If I use LiveStreamRecord module to record an mp4 from the live stream FFmpeg reports the following:

```auto
\ffmpeg-20130406-git-7775992-win64-static\bin\ffprobe trendnet.mp4
ffprobe version N-51639-g7775992 Copyright (c) 2007-2013 the FFmpeg developers
  built on Apr 5 2013 22:29:42 with gcc 4.8.0 (GCC)
  configuration: --enable-gpl --enable-version3 --disable-w32threads --enable-avisynth --enable-bzlib --enable-fontconfig --enable-frei0r --enable-gnutls --enab
le-iconv --enable-libass --enable-libbluray --enable-libcaca --enable-libfreetype --enable-libgsm --enable-libilbc --enable-libmp3lame --enable-libopencore-amrn
b --enable-libopencore-amrwb --enable-libopenjpeg --enable-libopus --enable-librtmp --enable-libschroedinger --enable-libsoxr --enable-libspeex --enable-libtheo
ra --enable-libtwolame --enable-libvo-aacenc --enable-libvo-amrwbenc --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libxavs --enable-libxvid --ena
ble-zlib
  libavutil 52. 25.100 / 52. 25.100
  libavcodec 55. 2.100 / 55. 2.100
  libavformat 55. 1.100 / 55. 1.100
  libavdevice 55. 0.100 / 55. 0.100
  libavfilter 3. 49.100 / 3. 49.100
  libswscale 2. 2.100 / 2. 2.100
  libswresample 0. 17.102 / 0. 17.102
  libpostproc 52. 2.100 / 52. 2.100
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'trendnet.mp4':
  Metadata:
    major_brand : f4v
    minor_version : 0
    compatible_brands: isommp42m4v
    creation_time : 2013-04-12 13:49:59
  Duration: 00:01:00.48, start: 0.000000, bitrate: 266 kb/s
    Stream #0:0(eng): Video: h264 (Baseline) (avc1 / 0x31637661), yuvj420p, 640x400, 263 kb/s, 30.01 fps, 30 tbr, 90k tbn, 30 tbc
    Metadata:
      creation_time : 2013-04-12 13:49:59
      handler_name : WowzaMediaServerPro

```

The file trendnet.mp4 crashes when viewed in Flash Player through a vod application.

Thanks,

Dan

---

<div class="post-metadata">

**Author:** ![Dan\_Burkett](https://avatars.discourse-cdn.com/v4/letter/d/838e76/32.png) [@Dan\_Burkett](https://community.wowza.com/u/Dan_Burkett)\
**Post date:** [April 12, 2013, 9:30am UTC](https://community.wowza.com/t/flash-player-crashes-on-rtsp-re-streaming-from-d-link-dcs-942l-and-trendnet-tv-ip572w/37117/12 "2013-04-12T09:30:42Z")

</div>

I sent sample MP4 files and RTSP URLs to support@wowza.com.

Thanks,

Dan

---

<div class="post-metadata">

**Author:** ![Dan\_Burkett](https://avatars.discourse-cdn.com/v4/letter/d/838e76/32.png) [@Dan\_Burkett](https://community.wowza.com/u/Dan_Burkett)\
**Post date:** [April 12, 2013, 10:02am UTC](https://community.wowza.com/t/flash-player-crashes-on-rtsp-re-streaming-from-d-link-dcs-942l-and-trendnet-tv-ip572w/37117/13 "2013-04-12T10:02:40Z")

</div>

Thanks Richard - I sent sample MP4 files and RTSP URLs to the support address.

About the 2 video blocks, in my RTSP setup my EC2 external IP address had changed. I corrected it and now have only the single stream:

```auto
Stream 0
  Type: Video
  Codec: H264 - MPEG-4 AVC (part10) (h264)
  Resolution: 640x480
  Frame rate: 30
  Decoded format: Planar 4:2:0 YUV full scale

```

- For the D-Link and TrendNET, I found that I had to change the following property for them to connect (Axis was fine with interleave):

```auto
		<MediaCaster>
			<RTP>
				<RTSP>
					<!-- udp, interleave -->
					<RTPTransportMode>udp</RTPTransportMode>
				</RTSP>
			</RTP>

```

---

<div class="post-metadata">

**Author:** ![Dan\_Burkett](https://avatars.discourse-cdn.com/v4/letter/d/838e76/32.png) [@Dan\_Burkett](https://community.wowza.com/u/Dan_Burkett)\
**Post date:** [April 12, 2013, 10:36am UTC](https://community.wowza.com/t/flash-player-crashes-on-rtsp-re-streaming-from-d-link-dcs-942l-and-trendnet-tv-ip572w/37117/14 "2013-04-12T10:36:08Z")

</div>

Thanks - I updated my post above. Bottom line, my RTP-\>RTSPConnectionIpAddress/RTSPOriginIpAddress addresses weren’t updated when my EC2 external IP changed. I have corrected them and see a single line in VLC now, which I think is good.

Any ideas on the H.264/MP4 Flash crash? I’ll wait to see if you can reproduce the problem with the URLs that I sent to the support address and the sample files.

Thanks!

Dan

---

<div class="post-metadata">

**Author:** ![Dan\_Burkett](https://avatars.discourse-cdn.com/v4/letter/d/838e76/32.png) [@Dan\_Burkett](https://community.wowza.com/u/Dan_Burkett)\
**Post date:** [April 12, 2013, 10:52am UTC](https://community.wowza.com/t/flash-player-crashes-on-rtsp-re-streaming-from-d-link-dcs-942l-and-trendnet-tv-ip572w/37117/15 "2013-04-12T10:52:08Z")

</div>

Unfortunately, no. I can still reproduce the Flash crash in 3 separate scenarios:

1. Re-stream the D-Link or TrendNET IP camera over RTMP to Flash Player.

2. Create an mp4 file from the D-Link or TrendNET IP camera using the Wowza LiveStreamRecord module and view it over RTMP using a VOD application.

3. Have either camera FTP a video clip and view it over RTMP using a VOD application.

Thanks,

Dan

---

<div class="post-metadata">

**Author:** ![Dan\_Burkett](https://avatars.discourse-cdn.com/v4/letter/d/838e76/32.png) [@Dan\_Burkett](https://community.wowza.com/u/Dan_Burkett)\
**Post date:** [April 12, 2013, 1:48pm UTC](https://community.wowza.com/t/flash-player-crashes-on-rtsp-re-streaming-from-d-link-dcs-942l-and-trendnet-tv-ip572w/37117/16 "2013-04-12T13:48:57Z")

</div>

Hi Rob,

I had an old Flash ActionScript project lying around that used a NetConnection and NetStream to display video in a Video object. My thought was that if I could reproduce the crash that I’m seeing in Flowplayer and the Wowza example clients, then maybe I could debug it in the IDE using the Flash debugger. I can reproduce the crash, but I can’t seem to get any useful information other than the metadata that is output right before the crash. In the test project, I create a metadata handler in a client and attach it to the NetStream.

From TestProject.mxml:

```auto
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
			   xmlns:s="library://ns.adobe.com/flex/spark"
			   xmlns:mx="library://ns.adobe.com/flex/mx"
			   xmlns:local="*"
			   xmlns:components="components.*"
			   xmlns:layouts="spark.layouts.*"
			   width="985" height="635" backgroundColor="#F4F4F6" creationComplete="init();">
	
	<fx:Script>
		<![CDATA[
			import mx.utils.ObjectUtil;
			
			private var connection:NetConnection;
			private var stream:NetStream;
			private var video:Video;
			private var meta:Object;
			
			private function init():void {
				connection = new NetConnection();
				connection.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler);
				connection.connect("rtmp://www.<mywowzaserver>.com:1935/rtp/_definst_");
			}
			
			private function netStatusHandler(event:NetStatusEvent):void {
				trace(event+": "+event.info.code);
				switch (event.info.code) {
					case "NetConnection.Connect.Success":
						connectStream();
						break;
					case "NetStream.Play.Failed":
						stream.close();
						break;
				}
			}
			private function connectStream():void {
				stream = new NetStream(connection);
				stream.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler);
				var client:Object = {};
				client.onMetaData = onMetaData;
				client.onCuePoint = onCuePoint;
				client.onStatus = netStatusHandler;
				stream.client = client;
				stream.play("wowzasupport/trendnet");
				video = new Video();
				video.attachNetStream(stream);
				uic.addChild(video);
			}
			public function onMetaData(info:Object):void {
				trace("meta");
				meta = info;
				uic.width = video.width;
				uic.height = video.height;
				panel.visible = true;
				trace(ObjectUtil.toString(info));
			}
			public function onCuePoint(info:Object):void {
				trace("cuepoint: time=" + info.time + " name=" + info.name + " type=" + info.type);
			}
			
		]]>
	</fx:Script>
	
	<s:Group id="panel" visible="false">
		<mx:UIComponent id="uic" />
	</s:Group>
	
</s:Application>

```

Cheers,

Dan

---

<div class="post-metadata">

**Author:** ![Dan\_Burkett](https://avatars.discourse-cdn.com/v4/letter/d/838e76/32.png) [@Dan\_Burkett](https://community.wowza.com/u/Dan_Burkett)\
**Post date:** [April 12, 2013, 2:28pm UTC](https://community.wowza.com/t/flash-player-crashes-on-rtsp-re-streaming-from-d-link-dcs-942l-and-trendnet-tv-ip572w/37117/17 "2013-04-12T14:28:21Z")

</div>

Thanks Rob,

I tried a few of those based on the troubleshooting guide, but I added the remaining ones that I hadn’t tried. Unfortunately I am still having no luck with the D-Link DCS-942L and TrendNET TV-IP572W. They crash when playback starts - the time increments to 1 second, no video is displayed then the player crashes. I see the same behaviour for VOD.

Here is my Application.xml for my RTP app:

```auto
<Root>
	<Application>
		<!-- Uncomment to set application level timeout values
		<ApplicationTimeout>60000</ApplicationTimeout>
		<PingTimeout>12000</PingTimeout>
		<ValidationFrequency>8000</ValidationFrequency>
		<MaximumPendingWriteBytes>0</MaximumPendingWriteBytes>
		<MaximumSetBufferTime>60000</MaximumSetBufferTime>
		<MaximumStorageDirDepth>25</MaximumStorageDirDepth>
		-->
		<Connections>
			<AutoAccept>true</AutoAccept>
			<AllowDomains></AllowDomains>
		</Connections>
		<!--
			StorageDir path variables
			
			${com.wowza.wms.AppHome} - Application home directory
			${com.wowza.wms.ConfigHome} - Configuration home directory
			${com.wowza.wms.context.VHost} - Virtual host name
			${com.wowza.wms.context.VHostConfigHome} - Virtual host config directory
			${com.wowza.wms.context.Application} - Application name
			${com.wowza.wms.context.ApplicationInstance} - Application instance name
			
		-->
		<Streams>
			<StreamType>rtp-live</StreamType>
			<StorageDir>${com.wowza.wms.context.VHostConfigHome}/content</StorageDir>
			<KeyDir>${com.wowza.wms.context.VHostConfigHome}/keys</KeyDir>
			<!-- LiveStreamPacketizers (separate with commas): cupertinostreamingpacketizer, smoothstreamingpacketizer, sanjosestreamingpacketizer, cupertinostreamingrepeater, smoothstreamingrepeater, sanjosestreamingrepeater -->
			<LiveStreamPacketizers>cupertinostreamingpacketizer</LiveStreamPacketizers>			
			<!-- Properties defined here will override any properties defined in conf/Streams.xml for any streams types loaded by this application -->
			<Properties>
				<Property>
					<Name>nalUnitFilter</Name>
					<Value>13</Value>
					<Type>Integer</Type>
				</Property>
			</Properties>
		</Streams>
		<Transcoder>
			<!-- To turn on transcoder set to: transcoder -->
			<LiveStreamTranscoder></LiveStreamTranscoder>
			<!-- [templatename].xml or ${SourceStreamName}.xml -->
			<Templates>${SourceStreamName}.xml,transrate.xml</Templates>
			<ProfileDir>${com.wowza.wms.context.VHostConfigHome}/transcoder/profiles</ProfileDir>
			<TemplateDir>${com.wowza.wms.context.VHostConfigHome}/transcoder/templates</TemplateDir>
			<Properties>
			</Properties>
		</Transcoder>
		<DVR>
			<!-- As a single server or as an origin, use dvrstreamingpacketizer in LiveStreamPacketizers above -->
			<!-- Or, in an origin-edge configuration, edges use dvrstreamingrepeater in LiveStreamPacketizers above -->
			<!-- As an origin, also add dvrchunkstreaming to HTTPStreamers below -->
			<!-- To turn on DVR recording set Recorders to dvrrecorder. *This works with dvrstreamingpacketizer *-->
			<Recorders></Recorders>
			<!-- As a single server or as an origin, set the Store to dvrfilestorage-->
			<!-- edges should have this empty -->
			<Store></Store>
			<!-- *Window Duration is length of live DVR window in seconds. *0 means the window is never trimmed. -->
			<WindowDuration>0</WindowDuration>
			<!-- Storage Directory is top level location where dvr is stored. *e.g. c:/temp/dvr -->
			<StorageDir>${com.wowza.wms.context.VHostConfigHome}/dvr</StorageDir>
			<!-- valid ArchiveStrategy values are append, version, delete -->
			<ArchiveStrategy>append</ArchiveStrategy>
			<!-- If this is a dvrstreamingrepeater, -->
			<!-- either define the general Application/Repeater/OriginURL below to point back to the origin -->
			<!-- or define this one (which affects only DVR origin-edge). *e.g. http://localhost/dvrorigin -->
			<Repeater>
				<ChunkOriginURL></ChunkOriginURL>
			</Repeater>
			<!-- Properties for DVR -->
			<Properties>
			</Properties>
		</DVR>
		<TimedText>
			<!-- VOD caption providers (separate with commas): vodcaptionprovidermp4_3gpp, vodcaptionproviderttml, vodcaptionprovidersrt, vodcaptionproviderscc -->
			<VODTimedTextProviders>vodcaptionprovidermp4_3gpp</VODTimedTextProviders>
			
			<!-- Properties for TimedText -->
			<Properties>
			</Properties>		
		</TimedText>
		<!-- HTTPStreamers (separate with commas): cupertinostreaming, smoothstreaming, sanjosestreaming -->
		<HTTPStreamers>cupertinostreaming</HTTPStreamers>			
		<SharedObjects>
			<StorageDir></StorageDir>
		</SharedObjects>
		<Client>
			<IdleFrequency>-1</IdleFrequency>
			<Access>
				<StreamReadAccess>*</StreamReadAccess>
				<StreamWriteAccess>*</StreamWriteAccess>
				<StreamAudioSampleAccess></StreamAudioSampleAccess>
				<StreamVideoSampleAccess></StreamVideoSampleAccess>
				<SharedObjectReadAccess>*</SharedObjectReadAccess>
				<SharedObjectWriteAccess>*</SharedObjectWriteAccess>
			</Access>
		</Client>
		<RTP>
			<!-- RTP/Authentication/[type]Methods defined in Authentication.xml. Default setup includes; none, basic, digest -->
			<Authentication>
				<PublishMethod>digest</PublishMethod>
				<PlayMethod>none</PlayMethod>
			</Authentication>
			<!-- RTP/AVSyncMethod. Valid values are: senderreport, systemclock, rtptimecode -->
			<!--AVSyncMethod>senderreport</AVSyncMethod-->
			<AVSyncMethod>systemclock</AVSyncMethod>
			<MaxRTCPWaitTime>12000</MaxRTCPWaitTime>
			<IdleFrequency>75</IdleFrequency>
			<RTSPSessionTimeout>90000</RTSPSessionTimeout>
			<RTSPMaximumPendingWriteBytes>0</RTSPMaximumPendingWriteBytes>
			<RTSPBindIpAddress></RTSPBindIpAddress>
			<RTSPConnectionIpAddress>0.0.0.0</RTSPConnectionIpAddress>
			<RTSPOriginIpAddress>127.0.0.1</RTSPOriginIpAddress>
			<IncomingDatagramPortRanges>*</IncomingDatagramPortRanges>
			<!-- Properties defined here will override any properties defined in conf/RTP.xml for any depacketizers loaded by this application -->
			<Properties>
				<Property>
					<Name>rtpIgnoreProfileLevelId</Name>
					<Value>true</Value>
					<Type>Boolean</Type>
				</Property>
			</Properties>
		</RTP>
		<MediaCaster>
			<RTP>
				<RTSP>
					<!-- udp, interleave -->
					<RTPTransportMode>udp</RTPTransportMode>
				</RTSP>
			</RTP>
			<!-- Properties defined here will override any properties defined in conf/MediaCasters.xml for any MediaCasters loaded by this applications -->
			<Properties>
				<Property>
					<Name>rtspStreamAudioTrack</Name>
					<Value>false</Value>
					<Type>Boolean</Type>
				</Property>
				<Property>
					<Name>rtspStreamVideoTrack</Name>
					<Value>true</Value>
					<Type>Boolean</Type>
				</Property>
				<Property>
					<Name>debugRTSPSession</Name>
					<Value>false</Value>
					<Type>Boolean</Type>
				</Property>
				<Property>
					<Name>rtspFilterUnknownTracks</Name>
					<Value>true</Value>
					<Type>Boolean</Type>
				</Property>
				<Property>
					<Name>rtspValidationFrequency</Name>
					<Value>0</Value>
					<Type>Integer</Type>
				</Property>
			</Properties>
		</MediaCaster>
		<MediaReader>
			<!-- Properties defined here will override any properties defined in conf/MediaReaders.xml for any MediaReaders loaded by this applications -->
			<Properties>
			</Properties>
		</MediaReader>
		<MediaWriter>
			<!-- Properties defined here will override any properties defined in conf/MediaWriter.xml for any MediaWriter loaded by this applications -->
			<Properties>
			</Properties>
		</MediaWriter>
		<LiveStreamPacketizer>
			<!-- Properties defined here will override any properties defined in conf/LiveStreamPacketizers.xml for any LiveStreamPacketizers loaded by this applications -->
			<Properties>
				<Property>
					<Name>cupertinoChunkDurationTarget</Name>
					<Value>2000</Value>
					<Type>Integer</Type>
				</Property>
				<Property>
					<Name>cupertinoMaxChunkCount</Name>
					<Value>10</Value>
					<Type>Integer</Type>
				</Property>
				<Property>
					<Name>cupertinoPlaylistChunkCount</Name>
					<Value>3</Value>
					<Type>Integer</Type>
				</Property>
				<Property>
					<Name>cupertinoRepeaterChunkCount</Name>
					<Value>3</Value>
					<Type>Integer</Type>
				</Property>
			</Properties>
		</LiveStreamPacketizer>
		<HTTPStreamer>
			<!-- Properties defined here will override any properties defined in conf/HTTPStreamers.xml for any HTTPStreamer loaded by this applications -->
			<Properties>
			</Properties>
		</HTTPStreamer>
		<Repeater>
			<OriginURL></OriginURL>
			<QueryString><![CDATA[]]></QueryString>
		</Repeater>*
		<Modules>
			<Module>
				<Name>base</Name>
				<Description>Base</Description>
				<Class>com.wowza.wms.module.ModuleCore</Class>
			</Module>
			<Module>
				<Name>properties</Name>
				<Description>Properties</Description>
				<Class>com.wowza.wms.module.ModuleProperties</Class>
			</Module>
			<Module>
				<Name>logging</Name>
				<Description>Client Logging</Description>
				<Class>com.wowza.wms.module.ModuleClientLogging</Class>
			</Module>
			<Module>
				<Name>flvplayback</Name>
				<Description>FLVPlayback</Description>
				<Class>com.wowza.wms.module.ModuleFLVPlayback</Class>
			</Module>
			<Module>
				<Name>ModuleLiveStreamRecord</Name>
				<Description>ModuleLiveStreamRecord</Description>
				<Class>com.wowza.wms.plugin.livestreamrecord.ModuleLiveStreamRecord</Class>
			</Module>
			<Module>
				<Name>ModuleLimitPublishedStreamBandwidth</Name>
				<Description>Module Limit to Published Stream Bandwidth</Description>
				<Class>com.wowza.wms.plugin.collection.module.ModuleLimitPublishedStreamBandwidth</Class>
			</Module>
		</Modules>
		<!-- Properties defined here will be added to the IApplication.getProperties() and IApplicationInstance.getProperties() collections -->
		<Properties>
			<Property>
				<Name>MaxBitrate</Name>
				<Value>0</Value>
				<Type>Integer</Type>
			</Property>
			<Property>
				<Name>StreamMonitorLogging</Name>
				<Value>true</Value>
				<Type>Boolean</Type>
			</Property>
		</Properties>
	</Application>
</Root>

```

Thanks,

Dan