# DVEO Multibitrate setup

**URL:** <https://community.wowza.com/t/dveo-multibitrate-setup/40737>\
**Category:** Wowza Streaming Engine\
**Created:** [September 19, 2014, 11:49am UTC](https://community.wowza.com/t/dveo-multibitrate-setup/40737 "2014-09-19T11:49:26Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Tome\_N1](https://avatars.discourse-cdn.com/v4/letter/t/45deac/32.png) [@Tome\_N1](https://community.wowza.com/u/Tome_N1)\
**Post date:** [September 19, 2014, 11:49am UTC](https://community.wowza.com/t/dveo-multibitrate-setup/40737/1 "2014-09-19T11:49:26Z")

</div>

I’m using DVEO Magnus DVB-S-S2 and trying to setup multibitrate stream to be pushed to wowza via udp.

1. I’m successfully sending single TS stream via UDP and using streammanager to start the stream.

stream file (test1.stream) udp://0.0.0.0:10000.

1. When sending two bitrates both are sent on same port, the Master bitrate has PID 1 assigned and Member bitrate has PID 2.

On wowza side I’m creating two files

stream file (test11.stream) udp://0.0.0.0:10044?programID=1

stream file 2 (test12.stream) udp://0.0.0.0:10044?programID=2

On stream1 I get the signal it is streaming, on stream2 there is nothing happening.

Test: I have configured the same output to go on HTTP on the DVEO this way I can test the outgoing output in VLC player and when I opened in VLC both streams appear. So the PID configuration is ok.

Let me know if you noticing what is wrong with this scenario.

Regards,

---

<div class="post-metadata">

**Author:** ![Daren\_Johnson](https://avatars.discourse-cdn.com/v4/letter/d/ee59a6/32.png) [@Daren\_Johnson](https://community.wowza.com/u/Daren_Johnson)\
**Post date:** [September 19, 2014, 9:48pm UTC](https://community.wowza.com/t/dveo-multibitrate-setup/40737/2 "2014-09-19T21:48:57Z")

</div>

Hi,

The [install-dir]/logs/\*access.log should show the programID as it is seen and selected, you can post here what is shown in those logs

so we can see what’s happening.

Daren

---

<div class="post-metadata">

**Author:** ![Tome\_N1](https://avatars.discourse-cdn.com/v4/letter/t/45deac/32.png) [@Tome\_N1](https://community.wowza.com/u/Tome_N1)\
**Post date:** [September 22, 2014, 2:36pm UTC](https://community.wowza.com/t/dveo-multibitrate-setup/40737/3 "2014-09-22T14:36:24Z")

</div>

I have also reconfigured the stream files with JSON notation like this:

{

uri:“udp://0.0.0.0:10044”,

mpegtsProgramID:1

}

And

{

uri:“udp://0.0.0.0:10044”,

mpegtsProgramID:2

}

After starting the first stream in Stream Manager (test11.stream) this is logged

```auto
INFO application app-start 2014-09-22 09:17:16 - - - - - 25.79 - - - - - - - _definst_ dveo/_definst_
INFO server comment 2014-09-22 09:17:17 - - - - - 26.827 - - - - - - - - MediaCasterStreamValidator.addMonitor[dveo/_definst_/dveo1.stream]

```

When I connect the second stream (test12.stream) this is happening:

```auto
INFO server comment 2014-09-22 09:24:14 - - - - - 443.833 - - - - - - - - MediaCasterStreamValidator.addMonitor[dveo/_definst_/dveo2.stream]
INFO server comment 2014-09-22 09:24:34 - - - - - 463.89 - - - - - - - - MediaCasterStreamValidator.onValidateMediaCaster[dveo/_definst_] Stream not healthy [stream startup timeout]: mp4:dveo2.stream
INFO server comment 2014-09-22 09:24:34 - - - - - 463.891 - - - - - - - - MediaCasterStreamValidator.onValidateMediaCastersStop[dveo/_definst_] Reset stream [mediaCaster]: mp4:dveo2.stream
INFO server comment 2014-09-22 09:24:34 - - - - - 463.892 - - - - - - - - RTPMediaCaster.resetConnection[828707774:dveo/_definst_:dveo2.stream]: 
INFO server comment 2014-09-22 09:24:34 - - - - - 463.893 - - - - - - - - RTPMediaCaster.closeRTPSession[828707774:dveo/_definst_:dveo2.stream]
INFO stream unpublish 2014-09-22 09:24:34 356395619 127.0.0.1 - 0 0 20.255 dveo2.stream 2 0 0 0 - - dveo2.stream -

```

If I start in different order test12.stream then test11.stream. In this case test11.stream does not work.