# Decoding RTSP/RTP Stream Using Teradek Cube

**URL:** <https://community.wowza.com/t/decoding-rtsp-rtp-stream-using-teradek-cube/47216>\
**Category:** Wowza Streaming Engine\
**Created:** [June 24, 2016, 11:20am UTC](https://community.wowza.com/t/decoding-rtsp-rtp-stream-using-teradek-cube/47216 "2016-06-24T11:20:24Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![M\_P1](https://avatars.discourse-cdn.com/v4/letter/m/b38774/32.png) [@M\_P1](https://community.wowza.com/u/M_P1)\
**Post date:** [June 24, 2016, 11:20am UTC](https://community.wowza.com/t/decoding-rtsp-rtp-stream-using-teradek-cube/47216/1 "2016-06-24T11:20:24Z")

</div>

I need to decode a feed from Wowza steaming engine, according to Teradek it’s doable, just like pulling any other RTSP/RTP stream. Where can I find the following info from the Wowza streaming engine webUI?

PROTOCOL=

HOST=

PORT=

NAME=

USERNAME=

PASSWORD=

Thanks

---

<div class="post-metadata">

**Author:** ![sal\_jefferson](https://avatars.discourse-cdn.com/v4/letter/s/6de8d8/32.png) [@sal\_jefferson](https://community.wowza.com/u/sal_jefferson)\
**Post date:** [June 24, 2016, 6:15pm UTC](https://community.wowza.com/t/decoding-rtsp-rtp-stream-using-teradek-cube/47216/2 "2016-06-24T18:15:30Z")

</div>

Hello there and welcome to the Wowza support forum. Please have a look at this guide:

[How to connect the Teradek Cube to Wowza Streaming Engine](https://www.wowza.com/docs/how-to-connect-the-teradek-cube-to-wowza-streaming-engine)

Regards,

Salvadore

---

<div class="post-metadata">

**Author:** ![Andy\_Engberson](https://sea2.discourse-cdn.com/flex002/user_avatar/community.wowza.com/andy_engberson/32/392_2.png) [@Andy\_Engberson](https://community.wowza.com/u/Andy_Engberson)\
**Post date:** [July 18, 2016, 11:58pm UTC](https://community.wowza.com/t/decoding-rtsp-rtp-stream-using-teradek-cube/47216/3 "2016-07-18T23:58:52Z")

</div>

Hi

It is possible to have an rtsp stream without a password. By default password authentication is turned on but you can change the settings. We have an [article here](https://www.wowza.com/docs/how-to-enable-username-password-authentication-for-rtmp-and-rtsp-publishing) on how to enable-username-password-authentication-for-RTMP-and-RTSP-publishing.

Andy\_E

---

<div class="post-metadata">

**Author:** ![M\_P1](https://avatars.discourse-cdn.com/v4/letter/m/b38774/32.png) [@M\_P1](https://community.wowza.com/u/M_P1)\
**Post date:** [June 24, 2016, 6:00pm UTC](https://community.wowza.com/t/decoding-rtsp-rtp-stream-using-teradek-cube/47216/4 "2016-06-24T18:00:47Z")

</div>

Hi. Thanks for the reply. I need to decode the feed those instructions are to encode with a Cube encoder which was pretty easy to set. I guess if there’s no password it’s straight forward all RTSP addresses are the same?

Server URL: rtsp://[wowza-ip-address]:1935/live

Stream Name: myStream

User: publisherName

password: [password]

Example; rtsp://123.123.123:1935/live

Is it possible to have no password on a stream?

Thanks

> Hello there and welcome to the Wowza support forum. Please have a look at this guide:
> 
> [How to connect the Teradek Cube to Wowza Streaming Engine](https://www.wowza.com/docs/how-to-connect-the-teradek-cube-to-wowza-streaming-engine)
> 
> Regards,
> 
> Salvadore