# DASH + HLS on same server ? **URL:** \ **Category:** Wowza Streaming Engine\ **Created:** [August 29, 2016, 8:26am UTC](https://community.wowza.com/t/dash-hls-on-same-server/47426 "2016-08-29T08:26:37Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![Jerome\_VIT](https://avatars.discourse-cdn.com/v4/letter/j/b9bd4f/32.png) [@Jerome\_VIT](https://community.wowza.com/u/Jerome_VIT)\ **Post date:** [August 29, 2016, 8:26am UTC](https://community.wowza.com/t/dash-hls-on-same-server/47426/1 "2016-08-29T08:26:37Z")
Hi, I try to transrate for DASH and HLS, both on the same server. With 1 target size to transrate : - 240p \> h264 + AAC - 240vp \> VP9 + Vorbis everything ok. But with more than 1, the server crash and need to reboot… I’m running on AWS C4.8xLarge - WSE 4.5 Best regard ---
**Author:** ![Jerome\_VIT](https://avatars.discourse-cdn.com/v4/letter/j/b9bd4f/32.png) [@Jerome\_VIT](https://community.wowza.com/u/Jerome_VIT)\ **Post date:** [August 29, 2016, 6:36pm UTC](https://community.wowza.com/t/dash-hls-on-same-server/47426/2 "2016-08-29T18:36:05Z")
Ok, I’m going to transrate h264 only ---
**Author:** ![Andrew\_Ramberg](https://avatars.discourse-cdn.com/v4/letter/a/7c8e57/32.png) [@Andrew\_Ramberg](https://community.wowza.com/u/Andrew_Ramberg)\ **Post date:** [September 13, 2016, 2:57pm UTC](https://community.wowza.com/t/dash-hls-on-same-server/47426/3 "2016-09-13T14:57:29Z")
Hello, You may want to check your log messages when transcoding to VP9. If you’re seeing messages indicating SKIPFRAME, this would be an indication that the instance is overloaded by the transcoding process. For additional transcoding horsepower, look into the NVIDIA g2 instance types. When configured [using the following steps](https://www.wowza.com/docs/how-to-configure-nvidia-nvenc-accelerated-encoding-on-amazon-ec2-g2-nvenc%28G2-NVENC%29), they provide very powerful transcoding using the built in NVENC GRID adapter. Best regards, Andrew