# Configuring Crestron Encoders

**URL:** <https://community.wowza.com/t/configuring-crestron-encoders/50137>\
**Category:** Wowza Streaming Engine\
**Tags:** encoder\
**Created:** [November 14, 2017, 9:13pm UTC](https://community.wowza.com/t/configuring-crestron-encoders/50137 "2017-11-14T21:13:07Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Neil\_Briscoe](https://avatars.discourse-cdn.com/v4/letter/n/13edae/32.png) [@Neil\_Briscoe](https://community.wowza.com/u/Neil_Briscoe)\
**Post date:** [November 14, 2017, 9:13pm UTC](https://community.wowza.com/t/configuring-crestron-encoders/50137/1 "2017-11-14T21:13:07Z")

</div>

Hi All,

Still new to setting up our encoders. I have two Crestron encoders I am working on setting up, a Crestron DMC-STRO and DM-TXRX-100-STR. On the Encoders, I have no problem setting them up to have the receiver initiate the connection, but I can’t seem to get the Transmitter to initiate (pushing to the server).

I have a requirement where we have pre-configured web pages with our players, and I need to send the feed to that channel on the wowza server.

I have gone through the RTSP/RTP setup guides with little success. I am assuming my issue is the address I am trying to reach.

I am using rtsp://192.168.0.10/TEST/T1 (ip sanitized for forms). Just to try and get it up and going I have disabled the RTSP/RTP authentication. I will re-enable once resolved.

Any help would be appreciated.

Cheers,

Neil