# Change trancoding template automaticly

**URL:** https://community.wowza.com/t/change-trancoding-template-automaticly/50267
**Category:** Wowza Streaming Engine
**Tags:** transcoder
**Created:** [November 30, 2017, 12:31pm UTC](https://community.wowza.com/t/change-trancoding-template-automaticly/50267 "2017-11-30T12:31:23Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![Jose\_David1](https://avatars.discourse-cdn.com/v4/letter/j/e9c0ed/32.png) [@Jose\_David1](https://community.wowza.com/u/Jose_David1)
#### Post date: [November 30, 2017, 12:31pm UTC](https://community.wowza.com/t/change-trancoding-template-automaticly/50267/1 "2017-11-30T12:31:23Z")

</div>

I have a transcoder that does 1080, 720, 480, and 360. If I then have a 720 input how do I do so that the 1080 trancoding does not happen automaticaly?

Would I have to mave several templates or is there a way so that the system only uses several presets depending on the input?

---

<div class="post-metadata">

### Author: ![Alex\_C](https://avatars.discourse-cdn.com/v4/letter/a/bbe5ce/32.png) [@Alex\_C](https://community.wowza.com/u/Alex_C)
#### Post date: [December 17, 2017, 8:52am UTC](https://community.wowza.com/t/change-trancoding-template-automaticly/50267/2 "2017-12-17T08:52:53Z")

</div>

Hello @Jose David,

You can use the module called **TranscoderControl** that can be found here:

[https://www.wowza.com/docs/how-to-control-which-streams-get-transcoded-moduletranscodercontrol](https://www.wowza.com/docs/how-to-control-which-streams-get-transcoded-moduletranscodercontrol)

Alex C.