# Amino set-top box instructions (A130) **URL:** \ **Category:** Wowza Streaming Engine\ **Tags:** media-players-and-devices\ **Created:** [February 19, 2010, 3:31pm UTC](https://community.wowza.com/t/amino-set-top-box-instructions-a130/92 "2010-02-19T15:31:41Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![system](https://sea2.discourse-cdn.com/flex002/user_avatar/community.wowza.com/system/32/447_2.png) [@system](https://community.wowza.com/u/system)\ **Post date:** [February 19, 2010, 3:31pm UTC](https://community.wowza.com/t/amino-set-top-box-instructions-a130/92/1 "2010-02-19T15:31:41Z")
[https://www.wowza.com/docs/how-to-use-amino-a130-a125-with-wowza-media-server](https://www.wowza.com/docs/how-to-use-amino-a130-a125-with-wowza-media-server) ---
**Author:** ![Charlie\_Good](https://sea2.discourse-cdn.com/flex002/user_avatar/community.wowza.com/charlie_good/32/383_2.png) [@Charlie\_Good](https://community.wowza.com/u/Charlie_Good)\ **Post date:** [July 23, 2010, 6:49am UTC](https://community.wowza.com/t/amino-set-top-box-instructions-a130/92/2 "2010-07-23T06:49:49Z")
It is obviously some kind of firweall/routing issue, right? If it works with both devices in the same network then there is some type of network issue. SEe if the suggestions in this forum post help: [http://community.wowza.com/t/-/97](http://community.wowza.com/t/-/97) Also, be sure in ip tables you have opened up all UDP ports. Also be sure your firewall has UDP open. UDP is tricky to get setup properly. Charlie ---
**Author:** ![Sebastien\_Faure](https://avatars.discourse-cdn.com/v4/letter/s/9f8e36/32.png) [@Sebastien\_Faure](https://community.wowza.com/u/Sebastien_Faure)\ **Post date:** [February 20, 2010, 8:06pm UTC](https://community.wowza.com/t/amino-set-top-box-instructions-a130/92/3 "2010-02-20T20:06:28Z")
Thank you Charlie. ---
**Author:** ![Gee\_Lee](https://avatars.discourse-cdn.com/v4/letter/g/c67d28/32.png) [@Gee\_Lee](https://community.wowza.com/u/Gee_Lee)\ **Post date:** [April 6, 2010, 3:42pm UTC](https://community.wowza.com/t/amino-set-top-box-instructions-a130/92/4 "2010-04-06T15:42:11Z")
Hello, Is it possible to use Wowza Media Server on a dedicated server (in the Cloud) to broadcast to Amino STBs over the internet or to users in different countries. Thank you fro your reply Gee ---
**Author:** ![Tim\_Affolder](https://avatars.discourse-cdn.com/v4/letter/t/9dc877/32.png) [@Tim\_Affolder](https://community.wowza.com/u/Tim_Affolder)\ **Post date:** [September 29, 2010, 2:15pm UTC](https://community.wowza.com/t/amino-set-top-box-instructions-a130/92/5 "2010-09-29T14:15:20Z")
Charlie, I was wondering if you have an extra copy of Amino STBremoteconf tool??? If you do please get in touch. Thanks ---
**Author:** ![Charlie\_Good](https://sea2.discourse-cdn.com/flex002/user_avatar/community.wowza.com/charlie_good/32/383_2.png) [@Charlie\_Good](https://community.wowza.com/u/Charlie_Good)\ **Post date:** [June 6, 2010, 4:12am UTC](https://community.wowza.com/t/amino-set-top-box-instructions-a130/92/6 "2010-06-06T04:12:20Z")
> Does Aminet 130 have linux inside ? If yes, do U have access to telnet or ssh ? Does Aminet 130 reconect to wowza server after stream fail (for example wowza server restart) … Can U setup to automaticaly open any stream after restart of amino box ? Yes, it is Linux inside Yes, you can telenet to the box I think it will try to reconnect after failure Yes, you can have it open a URL by default We cannot directly support the internal workings of the Amino box. You will need to get that information from Amino. Charlie ---
**Author:** ![Charlie\_Good](https://sea2.discourse-cdn.com/flex002/user_avatar/community.wowza.com/charlie_good/32/383_2.png) [@Charlie\_Good](https://community.wowza.com/u/Charlie_Good)\ **Post date:** [July 23, 2010, 6:28am UTC](https://community.wowza.com/t/amino-set-top-box-instructions-a130/92/7 "2010-07-23T06:28:43Z")
Probably a UDP port issue. Wowza is not able to send UDP packets to the Amino box due to firewall blocking. Be sure that you have opened up all UDP ports to inbound and outbound traffic. Start there. Charlie ---
**Author:** ![Charlie\_Good](https://sea2.discourse-cdn.com/flex002/user_avatar/community.wowza.com/charlie_good/32/383_2.png) [@Charlie\_Good](https://community.wowza.com/u/Charlie_Good)\ **Post date:** [July 23, 2010, 10:47am UTC](https://community.wowza.com/t/amino-set-top-box-instructions-a130/92/8 "2010-07-23T10:47:21Z")
It sounds like you are using the wrong IP address in the RTP/RTSPBindIpAddress statement in Application.xml. If yoiu are behind NAT be sure this is the internal address of the network interface. The address should be one that shows up when you do a ifconfig. Charlie ---
**Author:** ![Charlie\_Good](https://sea2.discourse-cdn.com/flex002/user_avatar/community.wowza.com/charlie_good/32/383_2.png) [@Charlie\_Good](https://community.wowza.com/u/Charlie_Good)\ **Post date:** [July 27, 2010, 6:33am UTC](https://community.wowza.com/t/amino-set-top-box-instructions-a130/92/9 "2010-07-27T06:33:43Z")
Be sure to upgrade the Amino box to the latest version and be sure you are running Wowza 2.1.2. Charlie ---
**Author:** ![Charlie\_Good](https://sea2.discourse-cdn.com/flex002/user_avatar/community.wowza.com/charlie_good/32/383_2.png) [@Charlie\_Good](https://community.wowza.com/u/Charlie_Good)\ **Post date:** [August 16, 2010, 4:06am UTC](https://community.wowza.com/t/amino-set-top-box-instructions-a130/92/10 "2010-08-16T04:06:11Z")
Yes, it does work FMLE to Amino. Charlie ---
**Author:** ![Charlie\_Good](https://sea2.discourse-cdn.com/flex002/user_avatar/community.wowza.com/charlie_good/32/383_2.png) [@Charlie\_Good](https://community.wowza.com/u/Charlie_Good)\ **Post date:** [October 7, 2010, 7:13am UTC](https://community.wowza.com/t/amino-set-top-box-instructions-a130/92/11 "2010-10-07T07:13:34Z")
I would try the option to send the stream out over MPEG-TS using the RTPPusher. It is the better way to get going. Charlie ---
**Author:** ![Charlie\_Good](https://sea2.discourse-cdn.com/flex002/user_avatar/community.wowza.com/charlie_good/32/383_2.png) [@Charlie\_Good](https://community.wowza.com/u/Charlie_Good)\ **Post date:** [October 14, 2010, 9:56am UTC](https://community.wowza.com/t/amino-set-top-box-instructions-a130/92/12 "2010-10-14T09:56:28Z")
You need to get that from Amino support. I suggest you contact them directly. We cannot hand out their firmware. Charlie ---
**Author:** ![Charlie\_Good](https://sea2.discourse-cdn.com/flex002/user_avatar/community.wowza.com/charlie_good/32/383_2.png) [@Charlie\_Good](https://community.wowza.com/u/Charlie_Good)\ **Post date:** [November 27, 2010, 3:53pm UTC](https://community.wowza.com/t/amino-set-top-box-instructions-a130/92/13 "2010-11-27T15:53:37Z")
Yes, it is possible. Just follow the instructions that are pointed to by the first post. Charlie ---
**Author:** ![Richard\_Lanham](https://avatars.discourse-cdn.com/v4/letter/r/c68b51/32.png) [@Richard\_Lanham](https://community.wowza.com/u/Richard_Lanham)\ **Post date:** [August 15, 2010, 8:27pm UTC](https://community.wowza.com/t/amino-set-top-box-instructions-a130/92/14 "2010-08-15T20:27:47Z")
I don’t have one to test, but it is my understand that it has been tested and does work. Richard ---
**Author:** ![Richard\_Lanham](https://avatars.discourse-cdn.com/v4/letter/r/c68b51/32.png) [@Richard\_Lanham](https://community.wowza.com/u/Richard_Lanham)\ **Post date:** [November 19, 2010, 10:52pm UTC](https://community.wowza.com/t/amino-set-top-box-instructions-a130/92/15 "2010-11-19T22:52:01Z")
It seems like it was solved by a firmware update. Which you have to contact Amino for. Richard ---
**Author:** ![Richard\_Lanham](https://avatars.discourse-cdn.com/v4/letter/r/c68b51/32.png) [@Richard\_Lanham](https://community.wowza.com/u/Richard_Lanham)\ **Post date:** [March 4, 2011, 8:15pm UTC](https://community.wowza.com/t/amino-set-top-box-instructions-a130/92/16 "2011-03-04T20:15:38Z")
Please don’t double post: [https://www.wowza.com/forums/showthread.php?10567-Amino-set-top-box-instructions-(A130-amp-A125](https://www.wowza.com/forums/showthread.php?10567-Amino-set-top-box-instructions-%28A130-amp-A125)) Thanks, Richard ---
**Author:** ![Anton\_Jowa](https://avatars.discourse-cdn.com/v4/letter/a/d9b06d/32.png) [@Anton\_Jowa](https://community.wowza.com/u/Anton_Jowa)\ **Post date:** [February 23, 2010, 12:31pm UTC](https://community.wowza.com/t/amino-set-top-box-instructions-a130/92/17 "2010-02-23T12:31:23Z")
Thanks. Is the RTP streaming over TCP or UDP? ---
**Author:** ![Ian\_Beyer](https://avatars.discourse-cdn.com/v4/letter/i/e99b99/32.png) [@Ian\_Beyer](https://community.wowza.com/u/Ian_Beyer)\ **Post date:** [October 14, 2010, 10:37pm UTC](https://community.wowza.com/t/amino-set-top-box-instructions-a130/92/18 "2010-10-14T22:37:33Z")
Just a reminder, if you want any software or support from Amino, you’ll more than likely need to execute an NDA (which, by the way, precludes you from sharing any of the software). Signing up for support with them is not an especially speedy process. ---
**Author:** ![Pat\_OHearn](https://avatars.discourse-cdn.com/v4/letter/p/9d8465/32.png) [@Pat\_OHearn](https://community.wowza.com/u/Pat_OHearn)\ **Post date:** [June 3, 2010, 2:58pm UTC](https://community.wowza.com/t/amino-set-top-box-instructions-a130/92/19 "2010-06-03T14:58:23Z")
I tested this with Aminet130 firmware versions 0.16.7 , 0.15.2, and 0.11.21 My initial tests were with the older 0.11.21 Firmware, and to my surprise it came right up, but only lasted for 90 seconds. After modifying my configuration to change RTSPSessionTimeout from the default 90000 to 0 then the stream stays up just fine. Later firmware versions 0.15.2 and above seem to keep the stream alive themselves by sending GET PARAMETER every 30 seconds, so the configuration change is not required. -Pat ---
**Author:** ![M\_de\_G](https://avatars.discourse-cdn.com/v4/letter/m/5daacb/32.png) [@M\_de\_G](https://community.wowza.com/u/M_de_G)\ **Post date:** [April 23, 2010, 11:38am UTC](https://community.wowza.com/t/amino-set-top-box-instructions-a130/92/20 "2010-04-23T11:38:29Z")
Would someone test if its possible with the Amino to play a stream that requires a username and password? So the url would be something like; ```auto rtsp://username:password@serverurl.com:port/app/stream.stream ``` Thanks 🙂 [Next page](https://community.wowza.com/t/amino-set-top-box-instructions-a130/92.md?page=2)