# Add additional AMF-parameters in liverepeater

**URL:** <https://community.wowza.com/t/add-additional-amf-parameters-in-liverepeater/43947>\
**Category:** Wowza Streaming Engine\
**Created:** [September 19, 2014, 12:44pm UTC](https://community.wowza.com/t/add-additional-amf-parameters-in-liverepeater/43947 "2014-09-19T12:44:56Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Thomas\_Bolt](https://avatars.discourse-cdn.com/v4/letter/t/c5a1d2/32.png) [@Thomas\_Bolt](https://community.wowza.com/u/Thomas_Bolt)\
**Post date:** [September 19, 2014, 12:44pm UTC](https://community.wowza.com/t/add-additional-amf-parameters-in-liverepeater/43947/1 "2014-09-19T12:44:56Z")

</div>

Hi

I’m building a livestream-repeater that should repeat some livestreams from a Flash Media Server. The connect-method on the FMS requires some additional parameters that are used to authenticate the user.

I’m able to add these additional parameters and dumping one of the streams using rtmpdump. See the following commandline - especially the -C parameters:

```auto
rtmpdump -r rtmp://myserver.com/myApp -a myApp -y myStream -W http://api.myserver.com/prototype.swf -p "http://api.myserver.com/index.php" -f "WIN 15,0,0,152" -o "d:\temp\a.flv" -V -B 600 -z -C N:2 -C N:8 -C N:1 -C N:33 -C S:abc_xyz -C S:"" -C S:"0" -C B:0

```

I’ve created an application following these steps: [https://www.wowza.com/docs/how-to-re-stream-an-unprotected-stream-from-adobe-media-server-or-a-cdn](https://www.wowza.com/docs/how-to-re-stream-an-unprotected-stream-from-adobe-media-server-or-a-cdn)

But now I’m stuck in adding the additional AMF-Parameters to the connect-method. The parameter-values are static.

Does anyone has an advice for me? Is it possible going this way? Do I Need to program a custom module? If yes: how?

Thank you in advance!

Tom

---

<div class="post-metadata">

**Author:** ![Matt\_Young](https://sea2.discourse-cdn.com/flex002/user_avatar/community.wowza.com/matt_young/32/389_2.png) [@Matt\_Young](https://community.wowza.com/u/Matt_Young)\
**Post date:** [September 25, 2014, 11:53am UTC](https://community.wowza.com/t/add-additional-amf-parameters-in-liverepeater/43947/2 "2014-09-25T11:53:48Z")

</div>

Hello Tom

It sounds as though you’d need a custom module. For this type of custom development, we have a consultants list we can provide you if you request it via support@wowza.com.

Thanks,

Matt