# A personal video recording project

**URL:** <https://community.wowza.com/t/a-personal-video-recording-project/384>\
**Category:** Wowza Developer Dojo\
**Created:** [February 8, 2009, 4:26pm UTC](https://community.wowza.com/t/a-personal-video-recording-project/384 "2009-02-08T16:26:22Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://sea2.discourse-cdn.com/flex002/user_avatar/community.wowza.com/system/32/447_2.png) [@system](https://community.wowza.com/u/system)\
**Post date:** [February 8, 2009, 4:26pm UTC](https://community.wowza.com/t/a-personal-video-recording-project/384/1 "2009-02-08T16:26:22Z")

</div>

I just finished a small project using the Video Recording example FLA provided by Wowza. It’s just for personal use on my web site but I’d like some feedback. Here’s a short example of how it works for me . [A short sample recording I made](http://mymail.playourvideo.net/vmplayer.htm?ID=vm2820099638.flv)

If you’d like to try it out and let me know if you spot any problems I’d sure appreciate knowing how it worked for you and in particular what didn’t work well.

Use the USER ID **2638** if you decide to make a test and don’t forget to right click on the display area and make the necessary setting selections to access your microphone and webcam. [CLICK HERE to try the application](http://mymail.playourvideo.net/vmrecord.htm)

You’ll note there is a Watch a Tutorial link on the menu. I hope you take a minute and watch that too before running your test.

Regards - Jim

---

<div class="post-metadata">

**Author:** ![Kevin\_Richard](https://avatars.discourse-cdn.com/v4/letter/k/f0a364/32.png) [@Kevin\_Richard](https://community.wowza.com/u/Kevin_Richard)\
**Post date:** [March 4, 2009, 11:19am UTC](https://community.wowza.com/t/a-personal-video-recording-project/384/2 "2009-03-04T11:19:57Z")

</div>

Hi Jim, just thought I would let you know that I took a few minutes to look at your example page and it looks great. I tried using the id that you created and you may have disabled it as the application said it was invalid. Other than that it works very well 🙂 Great job. 🙂

---

<div class="post-metadata">

**Author:** ![Jim\_Baker](https://avatars.discourse-cdn.com/v4/letter/j/65b543/32.png) [@Jim\_Baker](https://community.wowza.com/u/Jim_Baker)\
**Post date:** [March 4, 2009, 6:32pm UTC](https://community.wowza.com/t/a-personal-video-recording-project/384/3 "2009-03-04T18:32:49Z")

</div>

I appreciate the feedback. You are correct, I did disable the testing USER ID after I had run a number of tests with others. However, if you would like a USER ID for your own use, just click on the message me link on the web page and I’ll create one for you and email it to you.

Thanks again - Jim